| Sub-menu | Menu Option | ||
|---|---|---|---|
| Color Mode | Brightest | ||
| TV | |||
| Movie | |||
| Low Blue Light | |||
| Brightness | (-/+, 0~100) | ||
| Contrast | (-/+, -50~50) | ||
| Color Temp | 6500K | ||
| 7500K | |||
| 9300K | |||
| User | Red Gain | (-/+, 0~100) | |
| Green Gain | (-/+, 0~100) | ||
| Blue Gain | (-/+, 0~100) | ||
| Red Offset | (-/+, 0~100) | ||
| Green Offset | (-/+, 0~100) | ||
| Blue Offset | (-/+, 0~100) | ||
| Wall Color - Pink | |||
| Wall Color - Yellow | |||
| Wall Color - Blue | |||
| Tint | (-/+, -50~50) | ||
| Saturation | (-/+, 0~100) | ||
| Sharpness | (-/+, 0~50) | ||
| Gamma | 1.8 | ||
| 2.0 | |||
| 2.2 | |||
| 2.5 | |||
| Light Source Level | Full | ||
| Eco | |||
| Battery Saving | |||
| Test Pattern | OK | ||
| Reset Current Color Settings | Yes | ||
| Cancel | |||
M1X On-Screen Display Menu Tree: Difference between revisions
No edit summary |
// via Wikitext Extension for VSCode |
||
| Line 14: | Line 14: | ||
</noinclude> | </noinclude> | ||
=Input Source Selected - On-Screen Display (OSD) Menu Tree= | =Input Source Selected - On-Screen Display (OSD) Menu Tree= | ||
<tabber> | <tabber> | ||
|-|Image Setting= | |-|Image Setting= | ||
Revision as of 03:26, 9 July 2024
Input Source Selected - On-Screen Display (OSD) Menu Tree
| Sub-menu | Menu Option | |
|---|---|---|
| Aspect Ratio | Auto | |
| 4:3 | ||
| 16:9 | ||
| HDMI Setting | Auto | |
| Full | ||
| Limited | ||
| 3D Settings | 3D Format | Disable |
| Frame Sequential | ||
| Frame Packing | ||
| Top-Bottom | ||
| Side-by-Side | ||
| 3D Sync Invert | Disable | |
| Invert | ||
| Audio Settings | Audio Mode | Movie |
| Music | ||
| Audio Volume | (-/+, 0~50) | |
| Mute | Disable | |
| Enable | ||
| Information | Source | Ex. HDMI |
| Rsolution | Ex. 1920 x 1080 @60Hz | |
| 3D Format | Ex. Frame Packing | |
Image Setting Menu
After your input source is selected, you can adjust the Image Setting menu.
To access the Image Setting menu:
-
Use the Up ▲ / Down ▼ directional buttons to select a menu.
-
Then use the Left ◄ / Right ► directional buttons to enter the sub-menu(s) and/or adjust the settings.
-
Press the Return
button to go to the previous menu or exit.
Note: USB device source does not support the Image Setting function.
Advanced Setting Menu
After your input source is selected, you can adjust the Advanced menu.
To access the Advanced menu:
-
Use the Right ▶ directional buttons to access the Advanced menu.
-
Use the Up ▲ or Down ▼ directional buttons to select a menu.
-
Then use the Left ◄ / Right ► directional buttons to enter the sub-menu(s) and/or adjust the settings.
Home Screen - On-Screen Display (OSD) Menu Tree
Provides a user interface to manage files and folders.
Access and view all installed applications.
Manage various categories such as: Network settings, Basic and Advanced settings, Date & Time, Firmware update, and System Information.
| Sub-menu | Menu Option | ||
|---|---|---|---|
| Network Settings | Wi-Fi | Disable | |
| Enable | SSID | ||
| Configure IP | |||
| IP Address | |||
| Subnet Mask | |||
| Default Gateway | |||
| DNS Server | |||
| Others | |||
| Date & Time | Automatic Date & Time | Disable | |
| Enable | |||
| Date | |||
| Time | |||
| Time Zone | |||
| Time Format | 12 hours | ||
| 24 hours | |||
| Basic Settings | Language | English | |
| French | |||
| German | |||
| Italian | |||
| Spanish | |||
| Russian | |||
| 繁體中文 | |||
| 簡體中文 | |||
| 日本語 | |||
| 韓語 | |||
| Swedish | |||
| Dutch | |||
| Turkish | |||
| Czech | |||
| Portuguese | |||
| Thai | |||
| Polish | |||
| Finnish | |||
| Arabic | |||
| Indonesian | |||
| Hindi | |||
| Vietnam | |||
| Greek | |||
| Hungarian | |||
| Projector Projection | Front Table | ||
| Front Ceiling | |||
| Rear Table | |||
| Rear Ceiling | |||
| Keystone | Auto V Keystone | Disable | |
| Enable | |||
| V Keystone | (-/+, -40~40) | ||
| H Keystone | (-/+, -40~40) | ||
| 4 Corner | Disable | ||
| Enable | |||
| 4 Corner Adjustment | OK | ||
| Zoom | 0.8x | ||
| 0.9x | |||
| 1.0x | |||
| Test Pattern | OK | ||
| Advanced Settings | Power On Source | Disable | |
| HDMI | |||
| USB C | |||
| Power On Ring Tone | Disable | ||
| Enable | |||
| Smart Energy | Auto Power Off | Disable | |
| 10 minutes | |||
| 20 minutes | |||
| 30 minutes | |||
| Sleep Timer | Disable | ||
| 30 minutes | |||
| 1 hour | |||
| 2 hours | |||
| 3 hours | |||
| 4 hours | |||
| 8 hours | |||
| 12hours | |||
| Power Saving | Enable | ||
| Disable | |||
| Audio Settings | Audio Mode | Movie | |
| Music | |||
| Audio Volume | (-/+, 0~50) | ||
| Mute | Enable | ||
| Disable | |||
| Light Source Level | Full | ||
| Eco | |||
| Battery Saving | |||
| Screen Saver | Enable | ||
| Disable | |||
| Power Bank Mode | Enable | ||
| Disable | |||
| High Altitude Mode | Off | ||
| On | |||
| Reset Settings | OK | ||
| Reset to Factory Default | OK | ||
| Firmware Upgrade | Software Update Online | ||
| Software Update by USB | |||
| OTA Reminder | Enable | ||
| Disable | |||
| Software Version | |||
| Information | Light Source Hours | ||
| System Version | |||
| Memory Information | XX GB of XX GB Used | ||
| Wi-Fi Mac Address | |||
| Serial Number | |||
Mirror your personal device’s screen through the projector.
Select the appropriate Bluetooth mode.
Customize the Home Screen by adding extra Apps to it. You can place up to four different Apps.