M1X Initial Setup

From ViewSonic Documentation
Jump to: navigation, search

Choosing a Location - Projector Orientation

Personal preference and room layout will decide the installation location. Consider the following:

  • Size and position of your screen.
  • Location of a suitable power outlet.
  • Location and distance between the projector and other equipment.

The projector is designed to be installed in one of the following locations:

Front Table

The projector is placed near the floor in front of the screen.
M1X in Front of the Screen

Front Ceiling

The projector is suspended upside-down from the ceiling in front of the screen.
M1X in Front of the Screen

Rear Table[1]

The projector is placed near the floor behind the screen.
M1X in Front of the Screen

Rear Ceiling[1]

The projector is suspended upside-down from the ceiling behind the screen.
M1X in Front of the Screen
  1. 1.0 1.1 A rear projection screen is required.

Projection Dimensions

Note: (e) = Screen / (f) = Center of Lens
16:9 Image on a 16:9 Screen
(a) Screen Size (b) Projection Distance (c) Image Height Image Width
in. cm in. m in. m in. cm in. mm
30 76.2 32.16 0.82 32.16 0.82 14.7 37.36 26.15 664
40 101.6 42.88 1.09 42.88 1.09 19.6 49.81 34.86 886
50 127 53.6 1.36 53.6 1.36 24.5 62.26 43.58 1107
60 152.4 64.32 1.63 64.32 1.63 29.4 74.72 52.29 1328
70 177.8 75.04 1.91 75.04 1.91 34.3 87.17 61.01 1550
80 203.2 85.76 2.18 85.76 2.18 39.2 99.62 69.73 1771
90 228.6 96.48 2.45 96.48 2.45 44.1 112.07 78.44 1992
100 254 107.2 2.72 107.2 2.72 49 124.53 87.16 2214
Note: It is recommended that if you intend to permanently install the projector, please physically test the projection size and distance using the actual projector before you permanently install it.