• Print Print

M1X Remote Control: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
Line 30: Line 30:
|-
|-
| style="font-weight:bold;" | 3
| style="font-weight:bold;" | 3
| Focus
| Bluetooth
| Automatically focus the image<ref>This model does not support this feature.</ref>
| Enables Bluetooth
|-
|-
| style="font-weight:bold;" | 4
| style="font-weight:bold;" | 4
| Bluetooth Mode
| Up/Down/Left/Right
| Enable Bluetooth
| Navigates and selects menu items
|-
|-
| style="font-weight:bold;" | 5
| style="font-weight:bold;" | 5
| Up/Down/Left/Right
| Navigate and select menu items; Keystone adjustment
|-
| style="font-weight:bold;" | 6
| OK
| OK
| Confirms the selection
| Confirms the selection
|-
|-
| style="font-weight:bold;" | 7
| style="font-weight:bold;" | 6
| Setting
| Setting
| Displays the Setting menu
| Displays the Setting menu
|-
|-
| style="font-weight:bold;" | 8
| style="font-weight:bold;" | 7
| Return
| Return
| Returns to the previous screen
| Returns to the previous screen
|-
|-
| style="font-weight:bold;" | 9
| style="font-weight:bold;" | 8
| Home
| Home
| Access the Home screen
| Accesses the Home screen
|-
|-
| style="font-weight:bold;" | 10
| style="font-weight:bold;" | 9
| Volume Control
| Volume Control
| Increase or decrease the volume level
| Increases or decreases the volume level
|-
|-
| style="font-weight:bold;" | 11
| style="font-weight:bold;" | 10
| Mute
| Mute
| Mute the volume
| Turn off the volume
|-
|-
| style="font-weight:bold;" | 12
| style="font-weight:bold;" | 11
| Next/Previous
| Next/Previous
| Move to next/previous
| Move to the next or previous media
|-
|-
| style="font-weight:bold;" | 13
| style="font-weight:bold;" | 12
| Play/Pause
| Play/Pause
| Play or pause media
| Play or pause media
|-
|-
|}
|}
<references />
{{Note|This model does not support the Focus button.}}


=Effective Range=
=Effective Range=
To ensure proper function of the remote control follow the steps below:
To ensure proper function of the remote control follow the steps below:
# The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
# The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
# The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.).
# The distance between the remote control and the sensor(s) should not exceed 7 m (22 ft.).


=Replacing the Batteries=
=Replacing the Batteries=
Line 85: Line 81:
# Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative.
# Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative.
# Replace the battery tray by aligning it with the base and pushing it back into position.
# Replace the battery tray by aligning it with the base and pushing it back into position.
:::<small>'''NOTE:'''
[[File:M1X_Replacing_Batteries.png|right|260px| Replacing the Batteries]]
:::* Avoid leaving the remote control and batteries in excessive heat or a humid environment.
{{Note|
:::* Replace only with the same or equivalent type recommended by the battery manufacturer.
:* Avoid leaving the remote control and batteries in excessive heat or a humid environment.
:::* If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
:* Replace only with the same or equivalent type recommended by the battery manufacturer.
:::* Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.</small>
:* If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
:* Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
}}


[[Category:M1x]]
[[Category:M1X]]

Revision as of 08:11, 3 July 2024

M1X Remote Control
Introduction
Remote Control
Initial Setup
Connecting Power and Devices
Using the Projector
Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Overview

M1X's Remote Control
M1X's Remote Control
Number Button Description
1 Power Turns the projector On or Off
2 Source Displays the input source selection menu
3 Bluetooth Enables Bluetooth
4 Up/Down/Left/Right Navigates and selects menu items
5 OK Confirms the selection
6 Setting Displays the Setting menu
7 Return Returns to the previous screen
8 Home Accesses the Home screen
9 Volume Control Increases or decreases the volume level
10 Mute Turn off the volume
11 Next/Previous Move to the next or previous media
12 Play/Pause Play or pause media
Note: This model does not support the Focus button.

Effective Range

To ensure proper function of the remote control follow the steps below:

  1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
  2. The distance between the remote control and the sensor(s) should not exceed 7 m (22 ft.).

Replacing the Batteries

  1. To open the battery cover, turn the remote control over to view its back, open the cover in the direction of the arrow.
  2. Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative.
  3. Replace the battery tray by aligning it with the base and pushing it back into position.
Replacing the Batteries
Replacing the Batteries
Note:
  • Avoid leaving the remote control and batteries in excessive heat or a humid environment.
  • Replace only with the same or equivalent type recommended by the battery manufacturer.
  • If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
  • Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
Retrieved from "https://manuals.viewsonic.com/index.php?title=M1X_Remote_Control&oldid=42120"