• Print Print

M10 Connecting Power and Devices: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
 
(6 intermediate revisions by the same user not shown)
Line 47: Line 47:
<li>A sound effect will be audible upon entering pairing mode.</li>
<li>A sound effect will be audible upon entering pairing mode.</li>
<li>Upon successful connection, another sound effect will be audible.</li>
<li>Upon successful connection, another sound effect will be audible.</li>
{{Note-yellow|'''NOTE:'''<ul><li>The projector’s name will be labeled as “M10”.</li><li>Only the '''Power''' and '''Return''' buttons can exit Bluetooth mode.</li></ul>}}
{{Note-yellow|'''NOTE:'''<ul><li>The projector’s name will be labeled as “M10”.</li><li>Only the '''Power''' and '''Return''' buttons can exit Bluetooth mode.</li></ul>}}</ol>


===Bluetooth Out===
===Bluetooth Out===
Connect the projector to external headphones or speakers that support Bluetooth.
Connect the projector to external headphones or speakers that support Bluetooth.
<center><gallery mode="packed" heights=150px widths=150px>
<div class="res-img">[[File:M10_BT_Out.png|500px|Bluetooth Out]]</div>
M2e_BT_Out_1.png| Step 2 - Select Bluetooth Out
M2e_BT_Out_2.png| Step 3 - Search for nearby devices
</gallery></center>
To connect and pair your device:
To connect and pair your device:
# Go to: '''Home''' > '''Bluetooth'''.
<ol><li>Go to: '''Home''' > '''Bluetooth'''.</li>
# Use the '''Left''' and '''Right''' directional buttons on the remote control to select the '''Bluetooth Out''' option.
<li>Use the '''Left''' and '''Right''' directional buttons on the remote control to select the '''Bluetooth Out''' option.</li>
# The projector will search for nearby Bluetooth devices. Select your device from the list and press '''OK''' on the remote control.
<div class="res-img">[[File:M10_BT_Out_Select.png|500px|Bluetooth Out]]</div>
:::'''NOTE:''' Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth.
<li>The projector will search for nearby Bluetooth devices. Select your device from the list and press '''OK''' on the remote control.</li>
{{Note|Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth.}}</ol>


=Connecting to Networks=
=Connecting to Networks=


===Wi-Fi Connection===
==Wi-Fi Connection==
With built-in Wi-Fi, you can easily connect to wireless internet networks.


To connect to a Wi-Fi network:
To connect to a Wi-Fi network:
# Go to: '''Home''' > '''Setting''' > '''Network Settings''' > '''Wi-Fi'''
<ol><li>Go to: '''Home''' > '''Settings''' > '''Network Settings''' > '''Wi-Fi'''.</li>
# Press '''Left''' or '''Right''' on the remote control to select '''Enable'''.
<li>Press '''Left''' or '''Right''' on the remote control to select '''Enable'''.</li>
# Available Wi-Fi networks will then be displayed. Select one of the available Wi-Fi networks.
<div class="res-img">[[File:M10_WiFi_Connect_1.png|500px|Wi-Fi Connection]]</div>
# If you connect to a secure Wi-Fi network, you must enter the password when prompted.
<li>Available Wi-Fi networks will then be displayed. Select one of the available Wi-Fi networks.</li>
<div class="res-img">[[File:M10_WiFi_Connect_2.png|500px|Wi-Fi Connection]]</div>
<li>If you connect to a secure Wi-Fi network, you must enter the password when prompted.</li>
<div class="res-img">[[File:M10_WiFi_Connect_3.png|500px|Wi-Fi Connection]]</div></ol>


<center><gallery mode="packed" heights=150px widths=150px>
===Custom SSID===
M2e_WiFi_Connection_1.png| Step 2 - Enable Wi-Fi
<ol><li>Go to: '''Home''' > '''Settings''' > '''Network Settings''' > '''Wi-Fi'''.</li>
M2e_WiFi_Connection_2.png| Step 3 - Select Network
<li>Press '''Left''' or '''Right''' on the remote control to select '''Enable'''.</li>
M2e_WiFi_Connection_3.png| Step 4 - Enter credentials
<li>From the available Wi-Fi networks list select '''Others''' and press '''OK''' on the remote control.</li>
</gallery></center>
<div class="res-img">[[File:M10_WiFi_Custom_SSID_1.png|500px|Custom SSID]]</div>
 
<li>Enter the SSID and select the security level.</li>
 
<div class="res-img">[[File:M10_WiFi_Custom_SSID_2.png|500px|Custom SSID]]</div>
'''Custom SSID'''
<li>Enter the password when prompted.</li>
# Go to: '''Home''' > '''Setting''' > '''Network Settings''' > '''Wi-Fi'''
<div class="res-img">[[File:M10_WiFi_Custom_SSID_3.png|500px|Custom SSID]]</div></ol>
# Press '''Left''' or '''Right''' on the remote control to select '''Enable'''.
# From the available Wi-Fi networks list select '''Others''' and press '''OK''' on the remote control.
# Enter the SSID and select the security level.
# Enter the password when prompted.
<center><gallery mode="packed" heights=150px widths=150px>
M2_SSID_1.png| Step 3 - Select Others
M2_SSID_2.png| Step 4 - Enter SSID
M2_SSID_3.png| Step 5 - Enter Password
</gallery></center>


=Wireless Screen Mirroring=
=Wireless Screen Mirroring=

Latest revision as of 08:26, 26 February 2024

M10 Connecting Power and Devices
Introduction
Remote Control
Initial Setup
Connecting Power and Devices
Using the Projector
Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Ceiling Mounting Safety
Glossary
Troubleshooting
Maintenance

Connecting to Power

DC Power (Power Outlet)

Connect to Power
  1. Connect the power cord to the power adapter.
  2. Connect the power adapter to the DC IN jack at the side of the projector.
  3. Plug the power cord plug into a power outlet.
    4. Note: When installing the projector, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible outlet near the unit. If a fault should occur during operation of the projector, use the disconnect device to switch off the power supply, or disconnect the power plug.

Connecting to External Devices

Connecting to External Devices

HDMI Connection

Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI port of the projector.

USB Connection

USB Type A Connection

To enjoy photos, music, and movies, simply plug in a USB flash drive to the USB Type A port.

USB Type C Connection

Connect one end of a USB Type C cable to the USB Type C port of your device. Then connect the other end of the cable to the USB-C port of the projector.

NOTE:
  • Ensure your USB Type C device can support video transmission.
  • The connected device can also be charged (5V/2A).

Bluetooth Connection

Bluetooth Speaker

The projector is equipped with Bluetooth that allows the user to connect the projector to their Bluetooth device wirelessly for audio playback.

To connect and pair your device:

  1. Go to: Home > Bluetooth.
  2. Use the Left and Right directional buttons on the remote control to select Bluetooth Speaker or Bluetooth Pairing. Then press OK on the remote control.
    3. Bluetooth Speaker
  3. When the dialogue box appears, select Yes and press OK on the remote control to enter Bluetooth mode.
    4. Bluetooth Dialogue Box
  4. A sound effect will be audible upon entering pairing mode.
  5. Upon successful connection, another sound effect will be audible.
    6. NOTE:
    • The projector’s name will be labeled as “M10”.
    • Only the Power and Return buttons can exit Bluetooth mode.

Bluetooth Out

Connect the projector to external headphones or speakers that support Bluetooth.

Bluetooth Out

To connect and pair your device:

  1. Go to: Home > Bluetooth.
  2. Use the Left and Right directional buttons on the remote control to select the Bluetooth Out option.
    3. Bluetooth Out
  3. The projector will search for nearby Bluetooth devices. Select your device from the list and press OK on the remote control.
    4. Note: Once paired, if both the projector and your device are powered on they will automatically connect via Bluetooth.

Connecting to Networks

Wi-Fi Connection

With built-in Wi-Fi, you can easily connect to wireless internet networks.

To connect to a Wi-Fi network:

  1. Go to: Home > Settings > Network Settings > Wi-Fi.
  2. Press Left or Right on the remote control to select Enable.
    3. Wi-Fi Connection
  3. Available Wi-Fi networks will then be displayed. Select one of the available Wi-Fi networks.
    4. Wi-Fi Connection
  4. If you connect to a secure Wi-Fi network, you must enter the password when prompted.
    5. Wi-Fi Connection

Custom SSID

  1. Go to: Home > Settings > Network Settings > Wi-Fi.
  2. Press Left or Right on the remote control to select Enable.
  3. From the available Wi-Fi networks list select Others and press OK on the remote control.
    4. Custom SSID
  4. Enter the SSID and select the security level.
    5. Custom SSID
  5. Enter the password when prompted.
    6. Custom SSID

Wireless Screen Mirroring

Please see Wireless Screen Mirroring

Retrieved from "https://manuals.viewsonic.com/index.php?title=M10_Connecting_Power_and_Devices&oldid=39043"