XG272-2K-OLED Connecting Power and Devices

    From ViewSonic User Guide Database

    Connecting to Power

    1. Connect the power cord to the AC IN jack at the rear of the device.
    2. Connect the power cord plug to a power outlet.
    XG272-2K-OLED Connect Power.png


    Connecting to Video

    HDMI

    1. Connect one end of an HDMI cable to an HDMI port of the monitor.
    2. Plug the other end of the cable into the HDMI port of your computer.
    XG272-2K-OLED Connect HDMI.png
    Note: The monitor is equipped with two HDMI 2.1 ports.

    DisplayPort

    1. Connect one end of a DisplayPort cable to the DisplayPort port of the monitor.
    2. Plug the other end of the cable into the DisplayPort or Mini DisplayPort port of your computer.
    XG272-2K-OLED Connect DP.png
    Note:
    • The monitor is equipped with two DisplayPort 1.4 ports.
    • To connect the monitor to the Thunderbolt port (v. 1 & 2) on your Mac, connect the Mini DisplayPort end of a “Mini DisplayPort to DisplayPort cable” to the Thunderbolt output port of your Mac. Then connect the other end of the cable to the DisplayPort port of the monitor.

    Type C

    1. Connect one end of a USB Type C cable to the USB Type C port of the monitor.
    2. Plug the other end of the cable into the full-featured USB port of your computer.
    XG272-2K-OLED Connect Type C.png
    Note: For video output use, make sure your USB Type C output device (e.g., laptop) and cable support video signal transmission.


    USB Connection

    The monitor supports two types of USB ports, upstream and downstream. When making connection(s), observe the following guidelines.

    XG272-2K-OLED Connect USB.png
    USB Type Connection Type Description
    1 Upstream Type B Transfers data between the computer and the USB devices connected to the monitor.
    2 Downstream Type C Transfers audio, video, and power.
    Supports: 15W power delivery and 5V/3A charging.
    3 Type A For peripheral device(s) (e.g., storage device, keyboard, mouse, etc.).
    Supports 5V/2A charging.
    NOTE: 5V/2A cannot be sustained if all three USB Type A ports are used at the same time.
    Note: To use peripheral devices with the USB Type A ports, please also connect your computer to the monitor’s USB Type B port.

    Using the USB Ports

    1. To use the downstream USB Type A ports, connect one end of the USB Type B cable to the upstream USB Type B port of the monitor. Plug the other end of the cable, USB Type A, into a USB port of your computer.
    2. Connect your peripheral device to a downstream USB Type A port of the monitor.
    XG272-2K-OLED Connect Upstream Downstream.png

    Audio

    Plug the audio jack of the audio device into the Audio Out port of the monitor.

    XG272-2K-OLED Connect Audio.png
    Note: The monitor is also equipped with dual speakers.