IFP50-3 Remote Control

Overview

Remote Control

Button	Icon	Description
Power		Turns the projector On or Off.
Source		Displays the input source selection bar.
Focus		Automatically focus the image. To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
Setting		Displays the Settings menu.
App Menu		Displays the Application menu.
Up/Down/Left/Right		Navigates and selects the desired menu items and makes adjustments.
OK		Confirms the selection.
Return		Returns to the previous screen.
Home		Access the Home menu.
Volume Down		Decreases the volume level.
Mute		Mute/unmute.
Volume Up		Increase the volume level.
Network Setting		Displays Network settings.
Audio Mode		Displays the audio mode settings.
Bluetooth		Launch Bluetooth search.

Effective Range

The working range of the remote control is shown here. It has an effective range of 8 meters, 30° degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver.

Replacing the Batteries

1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
2. Remove any existing batteries (if necessary) and install two AAA batteries.
3. Replace the battery cover by aligning it with the base and pushing it back into position.

NOTE:

• Avoid leaving the remote control and batteries in excessive heat or a humid environment.
• Replace only with the same or equivalent type recommended by the battery manufacturer.
• If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
• Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.