IFP50-3 On-Screen Display Menu

On-Screen Display (OSD) Menu

Access General Settings, Input Settings, and Widgets through the OSD Menu.

ViewBoard has two options for opening the OSD Menu:

Option 1
Long press anywhere on the vLauncher background.

Option 2
Press the INPUT button on the remote control.

General Settings

To adjust the Backlight and enable/disable Flicker Free:

1. Press INPUT on the remote control or long press the vLauncher background and touch General on-screen (if needed) to display the General Settings menu.
2. Drag the brightness slider directly to adjust the backlight value, and/or touch On or Off to enable/disable the function.
3. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

To adjust the Volume:

1. Press INPUT on the remote control or long press the vLauncher background and touch General on-screen (if needed) to display the General Settings menu.
2. Drag the volume slider directly to adjust the value.
3. Press Mute on the remote control to enable or disable the mute function.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Input Settings

To select an Input Source:

1. Press INPUT on the remote control, press the setting button on the front panel, or press the setting icon from the toolbar to display the Input Settings
2. Press ▼/▲/◄/► to select the input source you want.

NOTE: PC source will only display when the slot-in computer is connected.

3. Press ENTER on the remote control, or touch the input source.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

NOTE: To adjust the settings of an input source, touch the setting icon next to the highlighted input source.

Widget

NOTE: Only available for the Embedded Player source.

To add a widget to the vLauncher welcome screen:

1. Long press the vLancher background via touch to launch the OSD Menu.
2. Select Widget.
3. Touch and hold the desired widget.
4. Drag the widget onto the vLauncher background.

Settings - HDMI & VGA Input Source

Press MENU on the remote control or select the setting icon next to the input source in Input Settings to launch the Settings menu. Settings include: Audio, Screen, Display, and Adjust.

Audio Settings

1. Press ▼ on the remote control and select the Audio menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust the Volume, Bass, Treble, and Balance directly by touching and adjusting each value, or with the remote control by pressing ENTER to adjust the option.
4. Touch the Mute slider directly to enable/disable mute, or press Mute on the remote control.
5. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Screen Settings

1. Press ▼ on the remote control and select the Screen menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust your preference by touching each value directly, or with the remote control by pressing ENTER.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

NOTE:

• Burn-in (Image Sticking) Protection

To reduce the possibility of screen burn-in, this unit is equipped with image sticking protection technology.

If the screen displays a still image for a certain period of time you define, the device activates a screen saver to prevent the formation of burnt in ghost images on the screen.

Image sticking protection moves the picture slightly on the screen. The image sticking protection time setting allows you to program the time between movements of the picture in minutes.

Display Settings

Low Blue Light Filter and Eye Health

Adjust Settings (VGA only)