IFP50-3 On-Screen Display Menu

On-Screen Display (OSD) Menu

Access General Settings, Input Settings, and Widgets through the OSD Menu.

ViewBoard has two options for opening the OSD Menu:

Option 1
Long press anywhere on the vLauncher background.

Option 2
Press the INPUT button on the remote control.

General Settings

To adjust the Backlight and enable/disable Flicker Free:

1. Press INPUT on the remote control or long press the vLauncher background and touch General on-screen (if needed) to display the General Settings menu.
2. Drag the brightness slider directly to adjust the backlight value, and/or touch On or Off to enable/disable the function.
3. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

To adjust the Volume:

1. Press INPUT on the remote control or long press the vLauncher background and touch General on-screen (if needed) to display the General Settings menu.
2. Drag the volume slider directly to adjust the value.
3. Press Mute on the remote control to enable or disable the mute function.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Input Settings

To select an Input Source:

1. Press INPUT on the remote control, press the setting button on the front panel, or press the setting icon from the toolbar to display the Input Settings
2. Press ▼/▲/◄/► to select the input source you want.

NOTE: PC source will only display when the slot-in computer is connected.

3. Press ENTER on the remote control, or touch the input source.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

NOTE: To adjust the settings of an input source, touch the setting icon next to the highlighted input source.