IFP50-3 Embedded Applications

Embedded Digital Whiteboarding App

Within ViewBoard, ViewSonic offers the embedded digital whiteboarding app, myViewBoard.

myViewBoard

Floating Bar

Toolbar

ViewBoard Cast

Working with ViewBoard® Cast software, the vCastReceiver app, will allow the ViewBoard® to receive vCastSender laptop screens (Windows/Mac/Chrome) and mobile (iOS/Android) users’ screens, photos, videos, annotations, and camera(s).

Network Information

• ViewBoard® Cast software, laptops, and mobile devices can connect to both the same subnet and across the subnet network.
• Connected devices will show up under “Device List” on the same subnet connection.
• If the device does not show up under “Device List”, users will need to key-in the on-screen PIN-code.

ViewBoard Cast is a wireless peer to peer data communication, therefore the below port settings are required:

Ports:

• CP: 56789, 25123, 8121, and 8000
• UDP: 48689 and 25123

Port and DNS activation:

• Port: 8001
• DNS: h1.ee-share.com

Cast Sender from Windows-based, Macbook, and Chrome devices

Windows, Mac, Chrome Devices:

1. Make sure your device is connected to the same network as the ViewBoard.
2. Visit the address that is shown on the ViewBoard to download the application.
3. Launch the application and click the connect icon next to the Device Name.

NOTE: If the device is not listed, click Connect with PIN-Code and input the pin-code displayed on the ViewBoard.