• Print Print

M1X Connecting Power and Devices: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
VY (talk | contribs)
7,615 edits
Created page with "<noinclude> {{Sticky_Menu_Projector_No_Ceiling |1=M1X_Introduction |2=M1X_Remote_Control |3=M1X_Initial_Setup |4=M1X_Connecting_Power_and_Devices |5=M1X_Using_the_Projector |6=M1X_Operation |7=M1X_On-Screen_Display_Menu_Tree |8=M1X_On-Screen_Display_Menu_Options |9=M1X_Specifications |10=M1X_Regulatory_and_Service_Information }} </noinclude> =Connecting to Power= <div class="res-img">500px</div> ===DC Power (Power Outlet)=== # Connect..."
 
VY (talk | contribs)
7,615 edits
// via Wikitext Extension for VSCode
Line 14: Line 14:
</noinclude>   
</noinclude>   
=Connecting to Power=
=Connecting to Power=
==DC Power (Power Outlet)==
<div class="res-img">[[File:M1+_G2_Connect_Power.svg|500px]]</div>
<div class="res-img">[[File:M1+_G2_Connect_Power.svg|500px]]</div>
===DC Power (Power Outlet)===
# Connect the power cord to the power adapter.
# Connect the power cord to the power adapter.
# Connect the power adapter to the DC IN jack at the side of the projector.
# Connect the power adapter to the DC IN jack at the side of the projector.
# Connect the power cord plug to a power outlet. When connected, the status LED will turn red.
# Connect the power cord plug to a power outlet. When connected, the status LED will turn white.
::<small>'''NOTE:''' Charge the projector for 4.5 hours via the power adapter before using it in battery mode for the first time.</small>
{{Note|Charge the projector for 4.5 hours via the power adapter before using it in battery mode for the first time}}


===Power on by Power Bank Function===
:<div class="note-yellow" style="
background-color: #ffff99;
border: solid 1px #ffff88;
border-radius: 3px;
border-left:solid 8px #fed141;
padding:8px;
width:auto;
max-width:70%;
"><i class='fas fa-exclamation-circle' style='font-size:24px'></i>'''IMPORTANT'''
:*Use only the bundled power adapter to change the battery pack and supply power to your LED projector.
:*Make sure your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your LED projector in power adapter mode.
:*The socket outlet must be easily accessible and near your LED projector.
:*To disconnect your LED projector from its main power supply, unplug your LED projector from the power socket.
</div>
 
 
 
 
 
==Power by Power Bank==
The projector can also be powered by a power bank.
The projector can also be powered by a power bank.
<div class="res-img">[[File:M1+_G2_Connect_Power_Bank.svg|500px]]</div>
<div class="res-img">[[File:M1+_G2_Connect_Power_Bank.svg|500px]]</div>
Line 28: Line 47:
# Connect one end of the USB Type-C cable to the '''USB-C''' port of the projector.
# Connect one end of the USB Type-C cable to the '''USB-C''' port of the projector.
# Connect the other end of the USB Type-C cable to the power bank.
# Connect the other end of the USB Type-C cable to the power bank.
::<small>'''NOTE:''' The power bank should be 45W (15V/3A) at least, and support Power Delivery (PD) protocol output. Additionally, at 15V/3A the projector can be powered on and charge simultaneously.</small>
{{Not|
:*The power bank should be 45W (15V/3A) at least, and support Power Delivery (PD) protocol output.
:*Additionally, at 15V/3A the projector can be powered on and charge simultaneously.</small>
}}


===Using the Battery===
===Using the Battery===

Revision as of 08:56, 3 July 2024

M1X Connecting Power and Devices
Introduction
Remote Control
Initial Setup
Connecting Power and Devices
Using the Projector
Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Connecting to Power

DC Power (Power Outlet)

  1. Connect the power cord to the power adapter.
  2. Connect the power adapter to the DC IN jack at the side of the projector.
  3. Connect the power cord plug to a power outlet. When connected, the status LED will turn white.
Note: Charge the projector for 4.5 hours via the power adapter before using it in battery mode for the first time
IMPORTANT
  • Use only the bundled power adapter to change the battery pack and supply power to your LED projector.
  • Make sure your LED projector is connected to the power adapter before turning it on for the first time. We strongly recommend that you use a grounded wall socket while using your LED projector in power adapter mode.
  • The socket outlet must be easily accessible and near your LED projector.
  • To disconnect your LED projector from its main power supply, unplug your LED projector from the power socket.



Power by Power Bank

The projector can also be powered by a power bank.

To power your projector:

  1. Connect one end of the USB Type-C cable to the USB-C port of the projector.
  2. Connect the other end of the USB Type-C cable to the power bank.

Template:Not

Using the Battery

The battery level icon will show at the top right of the Home Screen. As the battery’s power level runs low, the screen will show a “low battery message”.

Battery Usage Time Information

Charging About 4.5 hours
Usage Hours up to 6 hours (Battery Saving)/up to 4 hours (Extended Eco)/up to 3 hours (ECO) /up to 2.5 hours (Full)
Battery Level Indicator (Charging) During Charging: Flashing White LED light

Full Charge: Solid White LED light

Connecting to External Devices

HDMI Connection

Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI port (supports HDCP 1.4/HDMI 1.4) of your projector.

USB Connection

USB Type A Connection
To enjoy photos, music, and movies, simply plug in a USB flash drive to the USB Type A port.

USB-C Connection
Connect one end of a USB Type C cable to the USB-C port of your device. Then connect the other end of the cable to the USB-C port of your projector.

NOTE:
  • Ensure your USB Type C device can support video transmission.
  • The connected device can also be charged (5V/2A).

microSD

To enjoy photos, music, and movies, simply plug in a microSD to the Micro SD slot.

NOTE: Only supports FAT32 format and up to 64 GB.
Retrieved from "https://manuals.viewsonic.com/index.php?title=M1X_Connecting_Power_and_Devices&oldid=42165"