LDP135-151 On-Screen Display Menu

On-Screen Display (OSD) Menu Operation

Use the On-Screen Display (OSD) Menu to adjust various settings.

NOTE: The OSD Menu is only available when there is an input source (e.g., HDMI).

To open and operate the OSD Menu:

1. Press the MENU button on the remote control.
2. Press ▼/▲/◄/► on the remote control to select menu items or adjust values.
3. Press OK to confirm your selection.
4. Press the RETURN button to go back to the previous menu level.
5. Press the MENU button to exit the OSD Menu.

On-Screen Display (OSD) Menu Tree

Color Mode

Sub-menu
User
TV
Movie
Presentation

Display Mode

Sub-menu	Menu Option
Aspect Ratio	Auto
	4:3
	16:9
	Native
Brightness	(-/+, 0~100)
Contrast	(-/+, 0~100)
Tint	(-/+, -50~50)
Saturation	(-/+, 0~100)
Sharpness	(-/+, 0~20)
Gamma	Dark
	Middle
	Bright
Color Temp	User
	Standard
	Cool
	Warm
Reset

Advanced Mode

Sub-menu	Menu Option
HDR	Auto
	SDR
EOTF	Dark
	Middle
	Bright
HDMI Setting	Auto
	Full
	Limited

Speaker

Sub-menu	Menu Option
Audio Mode	User
	Standard
	Vivid
	Sports
	Movie
	Music
	News
	Auto
EQ_120Hz	(-/+, 0~100)
EQ_500Hz	(-/+, 0~100)
EQ_1.5KHz	(-/+, 0~100)
EQ_10KHz	(-/+, 0~100)
Reset
Audio Volume	(-/+, -50~50)
Mute	On
	Off

PIP/PBP Mode

Sub-menu	Menu Option
Off
PIP	Sub Picture on Top Left
	Sub Picture on Top Right
	Sub Picture on Bottom Left
	Sub Picture on Bottom Right
PBP	Windows x 2
	Windows x 3
	Windows x 4

Information

Sub-menu
Source
Resolution
HDR

On-Screen Display (OSD) Menu Options

Color Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Color Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

NOTE: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Color Mode	Standard For normal indoor ambient light intensity. User Custom user setting. TV Set the color temperature to 9300K. Movie Set the color temperature to 6500K. Presentation Set the color temperature to 7500K.

Display Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Display Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

NOTE: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Aspect Ratio	The Aspect Ratio is the ratio of the image width to the image height. Auto Scales an image proportionally to fit the projector’s native resolution in its horizontal width. This is suitable for the incoming image which is neither 4:3 nor 16:9 and you want to make the most use of the screen without altering the image’s aspect ratio. 4:3 Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration. 16:9 Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV. Native Default aspect ratio.
Advanced	Balance Adjust the audio balance from -50~50. Audio Reset Restore the settings to default.

Advanced Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Time menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

NOTE: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Time Setting	Set the time and date.
Shutdown Time	Schedule a shutdown time and frequency.
Power ON Time	Schedule a power on time and frequency, and tie to the input source.
Sleep Timer	Set a specific time for the display to enter stand-by mode.
Power Saving	Set a specific time for the display to enter stand-by mode after no input source is detected.
Time Sync	Toggle network synchronization On or Off.
Time Zone	Select the appropriate time zone for your area.

Speaker

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the NetWork menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

NOTE: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Ethernet Setting	Ethernet Switch Toggle the wired network connection On or Off. Connection Mode Select the network connection method, DHCP IP or Static IP. NOTE: If Manual IP is selected, you need to configure the IP, Netmask, Gateway, and DNS. Network Status View the network connection status.
WiFi Setting	WiFi Switch Toggle the WiFi connection On or Off. WiFi List View the available Wi-Fi networks, or add manually. Network Status View the network connection status.

PIP/PBP Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Update menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-men.

Menu Option	Description
Local Update	Update the display by using the update file on an SD Card or USB flash drive.

Information

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Advanced menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

NOTE: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Language	Menu Language Set the OSD Menu language.
Restore	Restore Setting Reset the OSD settings. Restore Default Restore to factory default settings. Note: All settings will be reset to default, including any additional APPs installed by the user.
About System	View system information such as: CPU core count, GPU core count, Memory used, Storage Space remaining, OS version, and Software version.