• Print Print

X100-4K+ Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> {{Sticky_Menu_Projector |1=X100-4K+_Introduction |2=X100-4K+_Remote_Control |3=X100-4K+_Initial_Setup |4=X100-4K+_Connecting_Power_and_Devices |5=X100-4K+_Using_th..."
 
No edit summary
 
Line 182: Line 182:
::* Avoid installing the projector near a heat source or air conditioner.
::* Avoid installing the projector near a heat source or air conditioner.
::* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.}}
::* Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.}}
{{#seo:
|title=ViewSonic Projector
|title_mode=append
|keywords=X100-4K+, projection orientation, choosing a location, projection dimensions, wall mounting, VESA
|description=How to setup and ceiling mount the X100-4K+ projector.
}}


[[Category:X100-4K+]]
[[Category:X100-4K+]]

Latest revision as of 08:49, 27 August 2021

X100-4K+ Initial Setup
Introduction
Remote Control
Initial Setup
Connecting Power and Devices
Using the Projector
Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Specifications
Regulatory and Service Information
Safety Precautions
Ceiling Mounting Safety
Glossary
Troubleshooting
Maintenance

Choosing a Location - Projector Orientation

Personal preference and room layout will decide the installation location. Consider the following:

  • Size and position of your screen.
  • Location of a suitable power outlet.
  • Location and distance between the projector and other equipment.
  • Front Table
    Front Table
  • Front Ceiling
    Front Ceiling
  • Rear Table
    Rear Table
  • Rear Ceiling
    Rear Ceiling
Location Description
Front Table The projector is placed near the floor in front of the screen.
Front Ceiling The projector is suspended upside-down from the ceiling in front of the screen.
Rear Table[1] The projector is placed near the floor behind the screen.
Rear Ceiling[1] The projector is suspended upside-down from the ceiling behind the screen.
  1. ↑ 1.0 1.1 A rear projection screen is required.

Projection Dimensions

NOTE: (e) = Screen | (f) = Center of Lens

16:9 Image on a 16:9 Screen

(a) Screen Size (b) Projection Distance (c) Image Height (d) Vertical Offset
Minimum Maximum
in. cm in. cm in. cm in. cm in. cm
40 101.6 41.84 106.3 50.29 127.5 19.61 49.8 12.75 32.4
60 152.4 62.75 159.4 75.3 191.3 29.42 74.7 19.12 48.6
70 177.8 73.21 186 87.85 223.2 34.32 87.2 22.31 56.7
80 203.2 83.67 212.5 100.41 255 39.22 99.6 25.49 64.8
90 228.6 94.13 239.1 113 286.9 44.12 112.1 28.68 72.8
100 254 104.59 265.7 125.51 318.8 49.03 124.5 31.87 80.9
120 304.8 125.51 318.8 150.61 382.5 58.83 149.4 38.24 97.1
150 381 156.88 398.5 188.26 478.2 73.54 186.8 47.8 121.4
200 508 209.18 531.3 251.01 637.6 98.05 249.1 63.73 161.9
These figures are for reference purposes only. Please refer to the actual projector for the precise dimensions.

Mounting the Projector

NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Ensure the screws used to attach the mount to the projector meet the following specifications:
  • Screw type: M6 x 8
  • Maximum Screw Length: 8 mm

CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.
Retrieved from "https://manuals.viewsonic.com/index.php?title=X100-4K%2B_Initial_Setup&oldid=13972"