X11-4K Introduction
Package Contents
X11-4K Projector
Quick Start Guide
Remote Control
Batteries
Power Cord
USB-C Cord
- NOTE: The power cord and video cables included in your package may vary depending on your country. Please contact your local reseller for more information.
Projector Overview
| Letter | Item |
|---|---|
| A | Projection Lens |
| B | Eye Protection Sensor |
| C | IR Sensor |
| D | Auto Focus Camera |
| E | Speaker |
| F | Power Key & Volume Knob |
| G | Handle |
| H | LED Indicator |
I/O Ports
| Number | Port | Description |
|---|---|---|
| 1 | AC Power Cord Inlet | AC Power Cord inlet |
| 2 | Wi-Fi Dongle | Wi-Fi dongle socket |
| 3 | S/PDIF | S/PDIF signal output socket |
| 4 | Audio Out (3.5 mm jack) | Audio signal output socket |
| 5 | Audio In (3.5 mm jack) | Audio signal input socket for Bluetooth mode |
| 6 | HDMI 1[1] | HDMI port[2] |
| 7 | HDMI 2[1] | HDMI port[2] |
| 8 | USB-C[3] | USB-C port |
| 9 | Micro SD | Micro SD socket (SDXC up to 64 GB - FAT32/NTFS) |
| 10 | LAN | RJ45 LAN port |
| 11 | USB 1 (5V/1.5A Out) | USB 2.0 Type A port (USB Reader - FAT32/NTFS) |
| 12 | USB 2 (5V/2A Out) | USB 3.0 Type A port (USB Reader - FAT32/NTFS) |
| 13 | Reset Button | Reset button for restarting the projector[4] |
| 14 | IR Sensor | IR Sensor for remote control |
- ↑ 1.0 1.1 Supports HDCP 2.0/HDMI 2.2.
- ↑ 2.0 2.1 iPhone/iPad users will need to buy an additional adapter. To avoid compatibility issues, please use Apple authorized accessories.
- ↑ Please use the supplied USB-C cable, and ensure your USB-C device can support video transmission.
- ↑ Insert a paper clip into the Reset button to restart the projector if the system freezes.
Further Reading
 |