LX700-4K Specifications
Technical Specifications
Item | Category | Specifications |
---|---|---|
Model | P/N. | LX700-4K |
No. | VS19701 | |
Projector | Type | Laser |
Display Size | 30”~300” | |
Throw Ratio | 1.06~1.45 (100”@2.34m) | |
Lens | F=2.51~2.93, f=15.985~21.423 mm | |
Display System | 1-CHIP DMD | |
Input Signal | HDMI (v. 2.0) | fh: 15~255 kHz, fv:24~240 Hz, Pixel rate: 600 MHz |
Resolution | Native | 3840 x 2160 |
Power | Input Voltage | DC IN 100-240V, 50/60 Hz (auto switch) |
Operating Conditions | Temperature | 0°C to 40°C (32°F to 104°F) |
Humidity | 10% to 80% (non-condensing) | |
Altitude | 0 to 760 m (0 to 2,500 ft.) at 0°C to 40°C (32°F to 104°F) 760 to 1,520 m (2,500 to 5,000 ft.) at 0°C to 35°C (32°F to 95°F) 1,520 to 3,048 m (5,000 to 10,000 ft.) at 0°C to 30°C (32°F to 86°F) | |
Storage Conditions | Temperature | -20°C to 60°C (-4°F to 140°F) |
Humidity | 5% to 90% (non-condensing) | |
Altitude | 0 to 12,100 m (0 to 40,000 ft.) | |
Dimensions | Physical (W x H x D) |
286 x 129 x 216 mm (11.26” x 5.08” x 8.50”) |
Weight | Physical | 3.30 kg (7.26 lbs) |
Power Consumption | On[1] | 180W (Typical) |
Off | < 0.5W (Standby) |
- ↑ The test condition follows EEI standards.
Projector Dimensions
286 mm (W) x 129 mm (H) x 216 mm (D)
Timing Chart
HDMI Video Timing
Timing | Resolution | Refresh Rate (Hz) |
---|---|---|
SDTV (480i) | 720 x 480 | 60 |
SDTV (480p) | 720 x 480 | 60 |
SDTV (576i) | 720 x 576 | 50 |
SDTV (576p) | 720 x 576 | 50 |
HDTV (720p) | 1280 x 720 | 50 / 60 |
HDTV (1080i) | 1920 x 1080 | 50 / 60 |
HDTV (1080p) | 1920 x 1080 | 24 / 50 / 60 |
4K | 3840 x 2160 | 24 / 25 / 30 / 50 / 60 |
HDMI PC Timing
Timing | Resolution | Refresh Rate (Hz) |
---|---|---|
VGA | 640 x 480 | 60 / 67 / 72 / 75 |
720 x 400 | 70 | |
SVGA | 800 x 600 | 56 / 60 / 72 / 75 |
832 x 624 | 75 | |
XGA | 1024 x 768 | 60 / 70 / 75 |
1152 x 864 | 70 / 75 / 85 | |
SXGA | 1280 x 1024 | 75 |
PowerBook G4 | 1152 x 870 | 75 |
HDMI Extended Wide Timing
Timing | Resolution | Refresh Rate (Hz) |
---|---|---|
XGA | 1152 x 864 | 75 |
SXGA | 1280 x 1024 | 60 |
Quad VGA | 1280 x 960 | 60 |
WXGA | 1280 x 720 | 120 |
1440 x 900 | 60 | |
WSXGA+ | 1680 x 1050 | 60 |
1920 x 1080 | 60 / 240 | |
WUXGA | 1920 x 1200-RB | 60 |
2K | 2560 x 1440 | 120 |
3D Support Timing
HDMI 3D | ||
---|---|---|
Frame Packing Format | ||
Timing | Resolution | Refresh Rate (Hz) |
1080p | 1920 x 1080 | 24 |
720p | 1280 x 720 | 50 / 60 |
Side by Side Format | ||
Timing | Resolution | Refresh Rate (Hz) |
1080i | 1920 x 1080 | 50 / 60 |
Top and Bottom Format | ||
Timing | Resolution | Refresh Rate (Hz) |
1080p | 1920 x 1080 | 24 |
720p | 1280 x 720 | 50 / 60 |
HQFS | ||
SVGA | 800 x 600 | 120 |
XGA | 1024 x 768 | 120 |
WXGA | 1280 x 800 | 120 |
- NOTE:
- 1080i @ 25 Hz and 720p @ 50Hz will run in 100 Hz;Other 3D timing will run in 120 Hz.
- 1080p @ 24 Hz will run 144 Hz (XGA, WXGA, 1080p)/96 Hz(WUXGA).
- If the input frame rate is 48 Hz or greater,the output frame rate is set to twice the input frame rate(FRC=2X mode).
- If the 3D input frame rate is 25 Hz or greater,the output frame rate is set to four times the input frame rate(FRC=4X mode).
- If the 3D input frame rate is 24 Hz(including 23.94 Hz),the output frame rate is set to six times the input frame rate(FRC=6X mode).
LED Indicators
Status and Description | Power Indicator Light | Temperature Indicator Light | Light Source Indicator Light | |
---|---|---|---|---|
Red | Blue | Red | Red | |
Standby State (Power cord input) |
Steady Light | |||
Power On (Warming) |
Flashing Light (0.5 sec off/0.5 sec on) | |||
Power On and Lamp Lighting | Steady Light | |||
Power Off (Cooling) |
Flashing Light (0.5 sec off/0.5 sec on) Back to red steady light when the cooling fan turns off. | |||
Error (Lamp Failure) |
Steady Light | |||
Error (Fan Failure) |
Flashing Light | |||
Error (Overheat) |
Steady Light |