LS751HD Connecting Power and Devices

    From ViewSonic User Guide Database

    Connecting to Power

    1. Connect the power cord to the AC IN jack at the rear of the projector.
    2. Plug the power cord into a power outlet.
    Connecting to Power


    NOTE: When installing the projector, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible outlet near the unit. If a fault should occur during operation of the projector, use the disconnect device to switch off the power supply, or disconnect the power plug.

    Connecting to External Devices

    HDMI Connection

    Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI 1/2 port of your projector.

    NOTE:
    • iPhone/iPad users will need to use an additional adapter.
    • The HDMI 1 port supports HDCP 2.2.
    • The HDMI 2 port supports HDCP 1.4.
    LS710HD LS751HD HDMI Connect.png

    Audio Connection

    You can connect to various external sound delivery devices via the Audio Out port.

    LS710HD LS751HD Audio Connect.png

    USB and Network Connection

    USB Type-A Connection
    The USB port is for supplying power and service needs.

    Network Connection
    Plug the network cable into the LAN port.

    LS710HD LS751HD USB Net Connect.png

    RS-232 Connection

    When you use a RS-232 serial port cable to connect the projector to an external computer certain functions can be controlled remotely by the PC, including Power On/Off, Volume adjustment, Input select, Brightness, and more.

    LS710HD LS751HD RS-232 Connect.png