X2000L-4K Initial Setup

Choosing a Location - Projector Orientation

Personal preference and room layout will decide the installation location. Consider the following:

• Size and position of your screen.
• Location of a suitable power outlet.
• Location and distance between the projector and other equipment.

• 
  Front Table
• 
  Front Ceiling
• 
  Rear Table
• 
  Rear Ceiling

Location	Description
Front Table	The projector is placed near the floor in front of the screen.
Front Ceiling	The projector is suspended upside-down from the ceiling in front of the screen.
Rear Table	The projector is placed near the floor behind the screen.
Rear Ceiling	The projector is suspended upside-down from the ceiling behind the screen.

Projection Dimensions

NOTE:

• (e) = Screen | (f) = Center of Lens
• The distance from the center of the lens to the rear of the projector is 25.34 cm (9.98”).

16:9 Image on a 16:9 Screen

(a) Screen Size		(b) Projection Distance		(c) Image Height		(d) Vertical Offset
in.	mm	in.	mm	in.	mm	in.	mm
65	1651	3.23	82	31.85	809	6.38	162
70	1778	4.24	108	34.32	872	6.85	174
80	2032	6.27	137	39.22	996	7.83	199
90	2286	8.30	211	44.12	1121	8.82	224
100	2540	10.33	234	49.03	1245	9.80	249
120	3048	14.39	332	58.83	1494	11.77	299
130	3302	16.43	417	64.73	1619	12.76	324
150	3810	20.48	520	73.54	1868	14.72	374

! colspan="2" | (a) Screen Size ! colspan="2" style="background-color:#C41230; color:#FFF;" | (b) Projection Distance ! colspan="2" | (c) Image Height ! colspan="2" | (d) Vertical Offset |- | in. | mm | in. | mm | in. | mm | in. | mm |- | 65 | 1651 | 3.23 | 82 | 31.85 | 809 | 6.38 | 162 |- | 70 | 1778 | 4.24 | 108 | 34.32 | 872 | 6.85 | 174 |- | 80 | 2032 | 6.27 | 137 | 39.22 | 996 | 7.83 | 199 |- | 90 | 2286 | 8.30 | 211 | 44.12 | 1121 | 8.82 | 224 |- | 100 | 2540 | 10.33 | 234 | 49.03 | 1245 | 9.80 | 249 |- | 120 | 3048 | 14.39 | 332 | 58.83 | 1494 | 11.77 | 299 |- | 130 | 3302 | 16.43 | 417 | 64.73 | 1619 | 12.76 | 324 |- | 150 | 3810 | 20.48 | 520 | 73.54 | 1868 | 14.72 | 374 |}

These figures are for reference purposes only. Please refer to the actual projector for the precise dimensions.

Allow at least 50 cm (20”) of clearance around the projector for proper ventilation and to prevent overheating.

Mounting the Projector

NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.

1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
2. Ensure the screws used to attach the mount to the projector meet the following specifications:

• Screw type: M4 x 12
• Maximum Screw Length: 12 mm

CAUTION

• Avoid installing the projector near a heat source or air conditioner.
• Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.