M1 mini Plus Using the Projector

Starting the Projector

1. Ensure the projector is connected to a power source or that the battery has sufficient charge.
2. Push the Power Switch to turn on the projector, and press the Power button on the remote control.
3. Move the Smart Stand to your desired viewing angle.

NOTE: When not in use, please push the Power Switch to Off. If only using the Power button on the remote control to power off, the projector will enter standby mode and the embedded battery will still consume some power.

First Time Activation

If the projector is activated for the first time, you will need to select your Preferred Language, Projection Orientation, Network Settings, and Source Input. Follow the on-screen instructions using the OK and Up/Down/Left/Right buttons on the remote control. When the Finish screen appears, this indicates the projector is ready to use.

Preferred Language

Select the desired language and press OK to confirm the selection.

Projection Orientation

Select the preferred projection orientation and press OK to confirm the selection.

Network Settings

Select one of the available Wi-Fi options.

File:M1 mini Plus WiFi Connection 2.jpg