LDS135-153 On-Screen Display Menu

On-Screen Display (OSD) Menu Operation

Use the On-Screen Display (OSD) Menu to adjust various settings.

Note: The OSD Menu is only available when there is an input source (e.g., HDMI).

To open and operate the OSD Menu:

1. Press the MENU button on the remote control.
2. Press ▼/▲/◄/► on the remote control to select menu items or adjust values.
3. Press OK to confirm your selection.
4. Press the RETURN button to go back to the previous menu level.
5. Press the MENU button to exit the OSD Menu.

On-Screen Display (OSD) Menu Tree

Color Mode

Sub-menu
User
TV
Movie
Presentation

Display Mode

Sub-menu	Menu Option
Aspect Ratio	Auto
	4:3
	16:9
	Native
Brightness	(-/+, 0~100)
Contrast	(-/+, 0~100)
Tint	(-/+, -50~50)
Saturation	(-/+, 0~100)
Sharpness	(-/+, 0~20)
Gamma	Dark
	Middle
	Bright
Color Temp	User
	Standard
	Cool
	Warm
Reset

Advanced Mode

Sub-menu	Menu Option
HDR	Auto
	SDR
EOTF	Dark
	Middle
	Bright
HDMI Setting	Auto
	Full
	Limited

Speaker

Sub-menu	Menu Option
Audio Mode	Movie
	Music
EQ_120 Hz	(-/+, 0~100)
EQ_500 Hz	(-/+, 0~100)
EQ_1.5 KHz	(-/+, 0~100)
EQ_5 KHz	(-/+, 0~100)
EQ_10 KHz	(-/+, 0~100)
Reset
Audio Volume	(-/+, -50~50)
Mute	On
	Off

PIP/PBP Mode

Sub-menu	Menu Option
Off
PIP	Sub Picture on Top Left
	Sub Picture on Top Right
	Sub Picture on Bottom Left
	Sub Picture on Bottom Right
PBP	Windows x 2
	Windows x 3
	Windows x 4

Information

Sub-menu
Source
Resolution
HDR

On-Screen Display (OSD) Menu Options

Color Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Color Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Color Mode	User Custom user setting. TV Set the color temperature to 9300K. Movie Set the color temperature to 6500K. Presentation Set the color temperature to 7500K.

Display Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Display Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Aspect Ratio	The Aspect Ratio is the ratio of the image width to the image height. Auto Scales an image proportionally to fit the projector’s native resolution in its horizontal width. This is suitable for the incoming image which is neither 4:3 nor 16:9 and you want to make the most use of the screen without altering the image’s aspect ratio. 4:3 Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration. 16:9 Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV. Native Default aspect ratio.
Brightness	The higher the value, the brighter the image. Lower values will result in a darker image.
Contrast	Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
Tint	The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes.
Saturation	Refers to the amount of that color in a video picture. Lower settings produce less saturated colors; in fact, a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
Sharpness	A high value results in a sharper picture; a low value softens the picture.
Gamma	Manually adjust the brightness level of the monitor’s grayscale levels.
Color Temp	Manually adjust the red, green, and blue values.
Reset	Return the Display Mode settings to their default values.

Advanced Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Advanced Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
HDR	SDR Enable Standard Dynamic Range. Auto Automatically adjust to the input source.
EOTF	Automatically adjusts the brightness levels of your image according to the input source. You can also manually select a brightness level to display better picture quality.
HDMI Setting	Auto Sets the display to detect the range of the input signal automatically. Full Sets the color range from 0~255. Limited Sets the color range from 15~255.

Speaker

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Speaker menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

Note: Some sub-menu options may have another sub-menu layer.

Menu Option	Description
Audio Mode	Movie Enhance the sense of space. Music Vibrant treble and stronger bass.
Reset	Return the Speaker settings to their default values.
Audio Volume	Adjust the volume level.
Mute	Toggle ON to turn off the speaker.

PIP/PBP Mode

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the PIP/PBP Mode menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-men.

Menu Option	Description
PIP/PBP Setup	Off Disable the PIP/PBP feature. PIP Split the screen into two parts, a main window and an inset window. User can specify the input source for each screen. PBP Display up to four (4) windows on screen at the same time.

Information

1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use ▼/▲/◄/► on the remote control to select the Information menu.
3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.

Menu Option	Description
Information	View Input Source, Resolution, and HDR information.