![Print](INVALID-TITLE:<span style="margin-right:10px;"></span><span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|1px|link=http://localhost/stage/tango/index.php?title=TD2265_Initial_Setup&printable=yes]]</span></span>
<span class="d-none d-md-inline"><span id="t-print" style="position: relative;bottom:2px; left:1%; z-index:9999; padding:0; margin:0;">[[File:Icon_Print.svg|Print|30px|link=http://localhost/stage/tango/index.php?title=TD2265_Initial_Setup&printable=yes]]</span></span>
[[Category:Template]]
[[Category:Archive]]){kind=small}
TD2265 Initial Setup: Difference between revisions
From ViewSonic Documentation
Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=TD2265_Introduction |2=TD2265_Initial_Setup |3=TD2265_Connecting_Power_and_Devices |4=TD2265_Adjusting_the_Viewing_Angle |5=TD2265_Quick_Menu |6=TD2265_Hot_Keys |7=TD2265_On-Screen_Display_Menu |8=TD2265_On-Screen_Display_Menu_Tree |9=TD2265_Specifications |10=TD2265_Regulatory_and_Service_Information }} </noinclude> =Adjusting the Stand= <ol><li>Place the monitor on a flat, stable surface with the screen facing down.</li> <li>Wit..." |
|||
| Line 28: | Line 28: | ||
<div class="res-img">[[File:TD2265_Stand_Install_1.png|400px|Installing the Stand]]</div> | <div class="res-img">[[File:TD2265_Stand_Install_1.png|400px|Installing the Stand]]</div> | ||
<li>Lift the device into its upright position on a flat stable surface.</li> | <li>Lift the device into its upright position on a flat stable surface.</li> | ||
<div class="res-img">[[File:TD2265_Stand_Install_2.png| | <div class="res-img">[[File:TD2265_Stand_Install_2.png|350px|Installing the Stand]]</div></ol> | ||
{{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}} | {{Note-yellow|Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.}} | ||
Revision as of 09:38, 15 June 2023
Adjusting the Stand
- Place the monitor on a flat, stable surface with the screen facing down.
- With one hand supporting the monitor, carefully pull and extend the stand.
- Lift the device into its upright position on a flat, stable surface.
- NOTE: Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Installing the Stand
- Place the monitor on a flat, stable surface with the screen facing down.
- Ensure the Adjustable Foot is secured against the monitor.
- Align the mounting holes of the stand with the VESA mounting holes at the rear of the monitor.
- Secure the stand to the monitor with the screws provided.
- Lift the device into its upright position on a flat stable surface.
Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
| Maximum Loading | Hole Pattern (W x H) | Interface Pad (W x H x D) | Pad Hole | Screw Specification | Quantity |
|---|---|---|---|---|---|
| 14 kg | 100 x 100 mm | 115 x 115 x 2.6 mm | Ø 5 mm | M4 x 10 mm | 4 screws |
- Turn off the device and disconnect all cables.
- Place the device on a flat, stable surface with the screen facing down.
- Unscrew the attached stand and carefully remove it (if applicable).
- Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
- Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.
Using the Security Slot
To help prevent the device from being stolen, use a security slot locking device to secure the device to a fixed object.
Additionally, fastening the monitor to a wall or fixed object using a security cable can help support the weight of the monitor in order to prevent the monitor from falling over.
Below is an example of setting up a security slot locking device on a table.
