TD2265 Specifications

From ViewSonic Documentation
Jump to: navigation, search

Technical Specifications

Item Category Specifications
Model P/N. TD2265
No. VS19573
LCD Type a-Si, TFT Active Matrix 1920 x 1080 LCD,

0.0831 (H) mm x 0.241 (V) mm pixel pitch

Display Size 54.5 cm, 22" (21.5" viewable)
Surface Treatment Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal Video Sync RGB Analog (75 Ω)
D-Sub: fh:24~82 kHz, fv:50~75 Hz

TMDS Digital (100 Ω)

HDMI: fh:24~82 kHz, fv:50~75 Hz
DisplayPort: fh:24~82 kHz, fv:50~75 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Resolution[1] Recommended 1920 x 1080 @ 60Hz
Supported
  • 1920 x 1080 @ 50, 60Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1400 x 1050 @ 60Hz
  • 1366 x 768 @ 60 Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 50, 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 1024 x 600 @ 60Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 800 x 480 @ 60Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 67, 72, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan (H x V) 478.66 x 260.28 mm (18.84” x 10.24”)
Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions
(with stand)
Physical
(W x H x D)
491.9 x 366.7 x 197.9 mm
(19.4” x 14.4” x 7.8”)
Dimensions
(without stand)
Physical
(W x H x D)
491.9 x 284.8 x 48 mm
(19.4” x 11.2” x 1.9”)
Wall Mount Dimensions 100 x 100 mm
Weight Physical 4.2 kg (9.26 lbs)
Power Saving Modes On 19W (Typical)
Off ≤ 0.3W (Max)
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.