Revision as of 06:00, 26 July 2022

LDP135-151 Portrait Mode

Dual-Screen Splicing

The DirectView LED Display can be installed in either Landscape or Portrait orientation.

Landscape Installation

Portrait Installation

NOTE: The System Control Boxes can be installed under the Cabinets (standard installation) for front access, or behind the Cabinets.

Ensure the wall area and size is an appropriate installation site.
Using the first Wall Mount Bracket, install the top Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).
Repeat Step 2, ensuring the second Wall Mount Bracket is level with the first Wall Mount Bracket. Keep a 47 ¹/₄" (1200 mm) space between the two brackets (as pictured above).
Install the remaining two Wall Mount Brackets in the same manner as the other two Wall Mount Brackets. The distance between the Wall Mount Brackets is 47 ¹/₄" (1200 mm) and 19 ¹¹/₁₆" (500 mm) respectively.

Ensure the wall can safely support 297.62 lbs. (135 kg).

Ensure the deviation of the wall surface is < ¹³/₆₄" (< 5 mm).

@@ Line 36: / Line 36: @@
 ===Installing the Wall Mount Brackets===
-:<div class="res-img">[[File:LDP135-151_Portrait_Wall_Mount_Brackets.png]]</div>
+:<div class="res-img">[[File:LDP135-151_Portrait_Wall_Mount_Brackets.png|400px]]</div>
 <ol><li>Ensure the wall area and size is an appropriate installation site.</li>
 <li>Using the first ''Wall Mount Bracket'', install the top ''Wall Mount Bracket'' with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).</li>