• Print Print

LDP163-181 On-Screen Display Menu: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_LDP135-151 |1=LDP163-181_Introduction |2=LDP163-181_Remote_Control |3=LDP163-181_Wall_Installation |4=LDP163-181_Floor_Stand_Installation |5=LDP163-1..."
 
No edit summary
Line 1: Line 1:
<noinclude>
<noinclude>
{{Sticky_Menu_LDP135-151
{{Sticky_Menu_LDP163-181
|1=LDP163-181_Introduction
|1=LDP163-181_Introduction
|2=LDP163-181_Remote_Control
|2=LDP163-181_Remote_Control
Line 7: Line 7:
|5=LDP163-181_Detachable_System_Control_Box
|5=LDP163-181_Detachable_System_Control_Box
|6=LDP163-181_Dual-Screen_Splicing
|6=LDP163-181_Dual-Screen_Splicing
|7=LDP163-181_Portrait_Mode
|7=LDP163-181_Connecting_Devices
|8=LDP163-181_Connecting_Devices
|8=LDP163-181_Using_the_Display
|9=LDP163-181_Using_the_Display
|9=LDP163-181_On-Screen_Display_Menu
|10=LDP163-181_On-Screen_Display_Menu
|10=LDP163-181_Embedded_Applications
|11=LDP163-181_Embedded_Applications
|11=LDP163-181_RS-232_Protocol
|12=LDP163-181_RS-232_Protocol
|12=LDP163-181_Specifications
|13=LDP163-181_Specifications
|13=LDP163-181_Regulatory_and_Service_Information
|14=LDP163-181_Regulatory_and_Service_Information
}}     __TOC__
}}     __TOC__
</noinclude>
</noinclude>
=On-Screen Display (OSD) Menu Operation=
=On-Screen Display (OSD) Menu Operation=

Revision as of 10:06, 2 August 2023

LDP163-181 On-Screen Display Menu
Introduction
Remote Control
Wall Installation
Floor Stand Installation
Detachable System Control Box
Dual-Screen Splicing
Connecting Devices
Using the Display
On-Screen Display Menu
Embedded Applications
RS-232 Protocol
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

On-Screen Display (OSD) Menu Operation

Use the On-Screen Display (OSD) Menu to adjust various settings.

NOTE: The OSD Menu is only available when there is an input source (e.g., HDMI).

To open and operate the OSD Menu:

  1. Press the MENU button on the remote control.
  2. Press ▼/▲/◄/► on the remote control to select menu items or adjust values.
  3. Press OK to confirm your selection.
  4. Press the RETURN button to go back to the previous menu level.
  5. Press the MENU button to exit the OSD Menu.

On-Screen Display (OSD) Menu Tree

Color Mode

Sub-menu
User
TV
Movie
Presentation

Display Mode

Sub-menu Menu Option
Aspect Ratio Auto
4:3
16:9
Native
Brightness (-/+, 0~100)
Contrast (-/+, 0~100)
Tint (-/+, -50~50)
Saturation (-/+, 0~100)
Sharpness (-/+, 0~20)
Gamma Dark
Middle
Bright
Color Temp User
Standard
Cool
Warm
Reset

Advanced Mode

Sub-menu Menu Option
HDR Auto
SDR
EOTF Dark
Middle
Bright
HDMI Setting Auto
Full
Limited

Speaker

Sub-menu Menu Option
Audio Mode User
Standard
Vivid
Sports
Movie
Music
News
Auto
EQ_120Hz (-/+, 0~100)
EQ_500Hz (-/+, 0~100)
EQ_1.5KHz (-/+, 0~100)
EQ_10KHz (-/+, 0~100)
Reset
Audio Volume (-/+, -50~50)
Mute On
Off

PIP/PBP Mode

Sub-menu Menu Option
Off
PIP Sub Picture on Top Left
Sub Picture on Top Right
Sub Picture on Bottom Left
Sub Picture on Bottom Right
PBP Windows x 2
Windows x 3
Windows x 4

Information

Sub-menu
Source
Resolution
HDR

On-Screen Display (OSD) Menu Options

Color Mode

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the Color Mode menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option Description
Color Mode

Standard
For normal indoor ambient light intensity.

User
Custom user setting.

TV
Set the color temperature to 9300K.

Movie
Set the color temperature to 6500K.

Presentation
Set the color temperature to 7500K.

Display Mode

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the Display Mode menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option Description
Aspect Ratio The Aspect Ratio is the ratio of the image width to the image height.

Auto
Scales an image proportionally to fit the projector’s native resolution in its horizontal width. This is suitable for the incoming image which is neither 4:3 nor 16:9 and you want to make the most use of the screen without altering the image’s aspect ratio.

4:3
Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration.

16:9
Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV.

Native
Default aspect ratio.

Brightness The higher the value, the brighter the image. Lower values will result in a darker image.
Contrast Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
Tint The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes.
Saturation Refers to the amount of that color in a video picture. Lower settings produce less saturated colors; in fact, a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic.
Sharpness A high value results in a sharper picture; a low value softens the picture.
Gamma Manually adjust the brightness level of the monitor’s grayscale levels.

Color Temp Manually adjust the red, green, and blue values.

Reset Return the Display Mode settings to their default values.

Advanced Mode

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the Advanced Mode menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option Description
HDR

SDR
Enable Standard Dynamic Range.

Auto
Automatically adjust to the input source.

EOTF Automatically adjusts the brightness levels of your image according to the input source. You can also manually select a brightness level to display better picture quality.
HDMI Setting

Auto
Sets the display to detect the range of the input signal automatically.

Full
Sets the color range from 0~255.

Limited
Sets the color range from 15~255.

Speaker

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the Speaker menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option Description
Audio Mode

Music
Vibrant treble and stronger bass.

Movie
Enhance the sense of space.

User
Customize the audio equalizer.

Reset Return the Speaker settings to their default values.
Audio Volume Adjust the volume level.
Mute Toggle ON to turn off the speaker.

PIP/PBP Mode

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the PIP/PBP Mode menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-men.
Menu Option Description
PIP/PBP Setup

Off
Disable the PIP/PBP feature.

PIP
Split the screen into two parts, a main window and an inset window. User can specify the input source for each screen.



PBP
Display up to four (4) windows on screen at the same time.



Information

  1. Press MENU on the remote control to display the OSD Menu.
  2. Then press OK or use ▼/▲/◄/► on the remote control to select the Information menu.
  3. Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
Menu Option Description
Information View Input Source, Resolution, and HDR information.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LDP163-181_On-Screen_Display_Menu&oldid=29391"