• Print Print

LDP135-151 Portrait Mode: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 45: Line 45:


===Installing the Cabinets===
===Installing the Cabinets===
 
<ol><li>Ensure 10 ''Mounting Brackets'' are attached to the rear of the five (5) Middle ''Cabinets'' are positioned horizontally as shown below:</li>
 
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_1.png|400px]]</div>
<li>Carefully lift each ''Cabinet'' up onto the ''Wall Mount Brackets'', starting from the bottom.</li>
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_2.png|400px]]</div>
:'''NOTE:''' ''Cabinet'' letter installation will differ based on the preferred ''System Control Box'' installation (left or right side).
:<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_3.png|400px]]</div>
<li>Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.</li>
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_4.png|400px]]</div>
<li>Push each ''Locking Bolt'' and lock each ''Hook'' with the hex tool to securely connect each cabinet together. It may be necessary to align the hole with an Allen wrench in order to engage the ''Locking Bolt''.</li>
:'''NOTE:''' There are five (5) ''Locking Bolts'' and 10 ''Hooks'' between each cabinet.
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_5.png|400px]]</div>
<li>Further secure the ''Cabinets'' together with M6x16mm screws.</li>
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_6.png|400px]]</div>
<li>Place the remaining ''Cabinets'' up onto the ''Wall Mount Brackets''. Install from bottom to top, ensuring the ''Mounting Brackets'' sit securely on the ''Wall Mount Brackets''.</li>
<li>Repeat '''Step 4''', securing the ''Cabinets'' together with each ''Locking Bolt'' and ''Hook''.</li>
:'''NOTE:''' There are five (5) Locking Bolts and 10 Hooks between each cabinet.
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_7.png|400px]]</div>
<li>Further secure the ''Cabinets'' together with M6x16mm screws.</li>
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_8.png|400px]]</div>
<li>After installing all the Cabinets, the installation wall should look like:</li>
<div class="res-img">[[File:LDP135-151_Portrait_Install_Cabinets_9.png|400px]]</div></ol>


===Connecting the System Control Box (Standard Installation)===
===Connecting the System Control Box (Standard Installation)===

Revision as of 06:11, 26 July 2022

LDP135-151 Portrait Mode
Introduction
Remote Control
Wall Installation
Floor Stand Installation
Detachable System Control Box
Dual-Screen Splicing
Portrait Mode
Connecting Devices
Using the Display
On-Screen Display Menu
Pre-installed Applications
RS-232 Protocol
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Dual-Screen Splicing

The DirectView LED Display can be installed in either Landscape or Portrait orientation.

Landscape Installation
Portrait Installation
NOTE: The System Control Boxes can be installed under the Cabinets (standard installation) for front access, or behind the Cabinets.

Wall Mounting

Installing the Wall Mount Brackets

  1. Ensure the wall area and size is an appropriate installation site.
  2. Using the first Wall Mount Bracket, install the top Wall Mount Bracket with the provided screws (M6x50mm Expansion for masonry; TA6x30mm for load bearing wood).
  3. Repeat Step 2, ensuring the second Wall Mount Bracket is level with the first Wall Mount Bracket. Keep a 47 ¹/₄" (1200 mm) space between the two brackets (as pictured above).
  4. Install the remaining two Wall Mount Brackets in the same manner as the other two Wall Mount Brackets. The distance between the Wall Mount Brackets is 47 ¹/₄" (1200 mm) and 19 ¹¹/₁₆" (500 mm) respectively.
    5. Ensure the wall can safely support 297.62 lbs. (135 kg).
    Ensure the deviation of the wall surface is < ¹³/₆₄" (< 5 mm).

Installing the Cabinets

  1. Ensure 10 Mounting Brackets are attached to the rear of the five (5) Middle Cabinets are positioned horizontally as shown below:
  2. Carefully lift each Cabinet up onto the Wall Mount Brackets, starting from the bottom.
    3. NOTE: Cabinet letter installation will differ based on the preferred System Control Box installation (left or right side).
  3. Ensure the Mounting Brackets sit securely on the Wall Mount Brackets as shown below.
  4. Push each Locking Bolt and lock each Hook with the hex tool to securely connect each cabinet together. It may be necessary to align the hole with an Allen wrench in order to engage the Locking Bolt.
    5. NOTE: There are five (5) Locking Bolts and 10 Hooks between each cabinet.
  5. Further secure the Cabinets together with M6x16mm screws.
  6. Place the remaining Cabinets up onto the Wall Mount Brackets. Install from bottom to top, ensuring the Mounting Brackets sit securely on the Wall Mount Brackets.
  7. Repeat Step 4, securing the Cabinets together with each Locking Bolt and Hook.
    8. NOTE: There are five (5) Locking Bolts and 10 Hooks between each cabinet.
  8. Further secure the Cabinets together with M6x16mm screws.
  9. After installing all the Cabinets, the installation wall should look like:

Connecting the System Control Box (Standard Installation)

Connecting the System Control Box (Hidden Installation)

Installing the LED Modules

Retrieved from "https://manuals.viewsonic.com/index.php?title=LDP135-151_Portrait_Mode&oldid=20298"