• Print Print

IFP50-3 Remote Control: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 15: Line 15:
</noinclude>
</noinclude>
=Overview=
=Overview=
[[File:M2_Remote_Control_Color.png|thumb|120px| Remote Control]]
[[File:IFP50-3_Remote_Control.png|thumb|120px| Remote Control]]
 
{| class="wikitable" width=45% style="text-align: center";
! style="font-weight:bold; background-color:#c41230; color:#ffffff;" | Button
! style="text-align: center; font-weight:bold; background-color:#c41230; color:#ffffff;" | Icon
! style="text-align: center; font-weight:bold; background-color:#c41230; color:#ffffff;" | Description
|-
| style="font-weight:bold;" | Power
| [[File:M2_Power_Icon.png|50px]]
| Turns the projector On or Off.
|-
| style="font-weight:bold;" | Source
| [[File:M2_Source_Icon.png|50px]]
| Displays the input source selection bar.
|-
| style="font-weight:bold;" | Focus
| [[File:M2_Focus_Icon.png|50px]]
| Automatically focus the image.
To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.
|-
| style="font-weight:bold;" | Setting
| [[File:M2_Setting_Icon.png|50px]]
| Displays the Settings menu.
|-
| style="font-weight:bold;" | App Menu
| [[File:M2_App_Icon.png|50px]]
| Displays the Application menu.
|-
| style="font-weight:bold;" | Up/Down/Left/Right
| [[File:M2_Selection_Icon.png|50px]]
| Navigates and selects the desired menu items and makes adjustments.
|-
| style="font-weight:bold;" | OK
| [[File:M2_OK_Icon.png|50px]]
| Confirms the selection.
|-
| style="font-weight:bold;" | Return
| [[File:M2_Return_Icon.png|50px]]
| Returns to the previous screen.
|-
| style="font-weight:bold;" | Home
| [[File:M2_Home_Icon.png|50px]]
| Access the Home menu.
|-
| style="font-weight:bold;" | Volume Down
| [[File:M2_Volume_Down_Icon.png|50px]]
| Decreases the volume level.
|-
| style="font-weight:bold;" | Mute
| [[File:M2_Mute_Icon.png|50px]]
| Mute/unmute.
|-
| style="font-weight:bold;" | Volume Up
| [[File:M2_Volume_Up_Icon.png|50px]]
| Increase the volume level.
|-
| style="font-weight:bold;" | Network Setting
| [[File:M2_Network_Icon.png|50px]]
| Displays Network settings.
|-
| style="font-weight:bold;" | Audio Mode
| [[File:M2_Audio_Icon.png|50px]]
| Displays the audio mode settings.
|-
| style="font-weight:bold;" | Bluetooth
| [[File:M2_BT_Icon.png|50px]]
| Launch Bluetooth search.
|}


=Effective Range=
=Effective Range=

Revision as of 10:39, 18 June 2020

IFP50-3 Remote Control
Introduction
Remote Control
Using Gestures
Connecting Devices
Using the ViewBoard
On-Screen Display Menu
ViewBoard Settings
Pre-installed Applications
RS-232 Protocols
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Overview

Remote Control

Effective Range

The working range of the remote control is shown here. It has an effective range of 8 meters, 30° degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver.

Replacing the Batteries

  1. Remove the cover on the rear of the remote control.
  2. Insert two “AAA” batteries, ensuring the “+” symbol on the battery matches the “+” on the battery post.
  3. Replace the cover by aligning it with the slot on the remote control and snapping the latch shut.


There is a risk of explosion if batteries are replaced with the incorrect type.
NOTE:
  • Avoid leaving the remote control and batteries in excessive heat or a humid environment.
  • Replace only with the same or equivalent type recommended by the battery manufacturer.
  • Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
Retrieved from "https://manuals.viewsonic.com/index.php?title=IFP50-3_Remote_Control&oldid=1910"