• Print Print

IFP50-3 Remote Control: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Newer edit →
Created page with "<noinclude> {{Sticky_Menu_ViewBoard |1=IFP50-3_Introduction |2=IFP50-3_Remote_Control |3=IFP50-3_Using_Gestures |4=IFP50-3_Connecting_Devices |5=IFP50-3_Using_the_ViewBoard |6..."
 
Line 85: Line 85:


=Effective Range=
=Effective Range=
[[File:M2_remote_Control_Effective_Range.png|thumb|200px| IR Receiver Location]]
The working range of the remote control is shown here. It has an effective range of 8 meters, 30° degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver.
To ensure proper function of the remote control follow the steps below:
# The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s).
# The distance between the remote control and the sensor(s) should not exceed 8 m (26 ft.)


:::<small>'''NOTE:''' Refer to the illustration for the location of the infrared (IR) remote control sensor(s).</small>
<div class="res-img">[[File:IFP50-3_Remote_Range.png|400px]]</div>


=Replacing the Batteries=
=Replacing the Batteries=

Revision as of 10:21, 18 June 2020

IFP50-3 Remote Control
Introduction
Remote Control
Using Gestures
Connecting Devices
Using the ViewBoard
On-Screen Display Menu
ViewBoard Settings
Pre-installed Applications
RS-232 Protocols
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Overview

Remote Control
Button Icon Description
Power Turns the projector On or Off.
Source Displays the input source selection bar.
Focus Automatically focus the image.

To manually adjust, press and hold the Focus button on the remote control for three (3) seconds.

Setting Displays the Settings menu.
App Menu Displays the Application menu.
Up/Down/Left/Right Navigates and selects the desired menu items and makes adjustments.
OK Confirms the selection.
Return Returns to the previous screen.
Home Access the Home menu.
Volume Down Decreases the volume level.
Mute Mute/unmute.
Volume Up Increase the volume level.
Network Setting Displays Network settings.
Audio Mode Displays the audio mode settings.
Bluetooth Launch Bluetooth search.

Effective Range

The working range of the remote control is shown here. It has an effective range of 8 meters, 30° degrees left and right. Ensure there is nothing obstructing the remote control’s signal to the receiver.

Replacing the Batteries

  1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across.
  2. Remove any existing batteries (if necessary) and install two AAA batteries.
  3. Replace the battery cover by aligning it with the base and pushing it back into position.
NOTE:
  • Avoid leaving the remote control and batteries in excessive heat or a humid environment.
  • Replace only with the same or equivalent type recommended by the battery manufacturer.
  • If the battery is drained or if you will not be using the remote control for an extended period of time, remove the battery to avoid damage to the remote control.
  • Dispose of used batteries according to the manufacturer’s instructions and local environment regulations for your region.
Retrieved from "https://manuals.viewsonic.com/index.php?title=IFP50-3_Remote_Control&oldid=1908"