• Print Print

VB-VIS-003 Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older edit
No edit summary
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 7: Line 7:
|5=VB-VIS-003_Using_vDocCam+
|5=VB-VIS-003_Using_vDocCam+
|6=VB-VIS-003_Specifications
|6=VB-VIS-003_Specifications
|7=VB-AUD-201_Regulatory_and_Service_Information
|7=VB-VIS-003_Regulatory_and_Service_Information
}}
}}
</noinclude>
</noinclude>
=Setting Up the Document Camera=
=Setting Up the Document Camera=
<ol><li>Lift the device by pushing through the opening at the ''Base Plate''.</li>
<ol><li>Lift the device by pushing through the opening at the ''Base Plate''.</li>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_1.png]]</div>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_1.png|400px]]</div>
<li>Press against the ''Base Plate'' and pull up on the ''Camera Arm'' to extend it. Then, rotate the ''Camera Head''.</li>
<li>Press against the ''Base Plate'' and pull up on the ''Camera Arm'' to extend it. Then, rotate the ''Camera Head''.</li>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_2.png]]</div>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_2.png|500px]]</div>
:'''NOTE:''' Do not turn the ''Camera Head'' in the wrong direction.
{{Note|Do not turn the ''Camera Head'' in the wrong direction.}}
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_3.png]]</div>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_3.png|500px]]</div>
<li>Adjust the ''Camera Arm'' to change the height and position of the camera. Fully extend the ''Camera Arm'' to capture the maximum shooting area of A3 at output, 2048 x 1536 4:3 mode.</li>
<li>Adjust the ''Camera Arm'' to change the height and position of the camera. Fully extend the ''Camera Arm'' to capture the maximum shooting area of A3 at output, 2048 x 1536 4:3 mode.</li>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_4.png]]</div>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_4.png|500px]]</div>
<li>Press the '''Autofocus Button''' once to focus the camera. Press and hold the '''Flip Button''' to adjust image orientation (if applicable).</li>
<li>Press the '''Autofocus Button''' once to focus the camera. Press and hold the '''Flip Button''' to adjust image orientation (if applicable).</li>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_5.png]]</div>
<div class="res-img">[[File:VB-VIS-003_Initial_Setup_5.png|400px]]</div>
<li>If the environment is dark, press the '''LED Light Button''' to turn on the LED light.</li></ol>
<li>If the environment is dark, press the '''LED Light Button''' to turn on the LED light.</li></ol>


Latest revision as of 06:00, 27 September 2024

VB-VIS-003 Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Using vDocCam+
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Setting Up the Document Camera

  1. Lift the device by pushing through the opening at the Base Plate.
  2. Press against the Base Plate and pull up on the Camera Arm to extend it. Then, rotate the Camera Head.
    3. Note: Do not turn the Camera Head in the wrong direction.
  3. Adjust the Camera Arm to change the height and position of the camera. Fully extend the Camera Arm to capture the maximum shooting area of A3 at output, 2048 x 1536 4:3 mode.
  4. Press the Autofocus Button once to focus the camera. Press and hold the Flip Button to adjust image orientation (if applicable).
  5. If the environment is dark, press the LED Light Button to turn on the LED light.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VB-VIS-003_Initial_Setup&oldid=51576"