LDM163-182 Connecting Devices

    From ViewSonic User Guide Database

    Making Connections

    Connecting to Video

    HDMI

    Video signal via HDMI

    Connect an HDMI cable from your external device to the HDMI 1/HDMI 2/HDMI 3/HDMI 4 port on the display.

    Note: The HDMI 1/HDMI 2/HDMI 3 port is accessed by removing the System Control Box Cover.

    HDMI Out

    Video signal via HDMI Out

    To output video via an external display device, connect an HDMI cable to the HDMI IN port of your external display device, and the other end to the HDMI OUT port of the display.

    Note: The HDMI OUT port is accessed by removing the System Control Box Cover.

    USB Connections

    USB Type A

    USB Type A connection

    Plug the USB device or storage drive into a USB Type A (USB 3.0 or USB 2.0) port on the display’s control panel.

    Note: An additional USB Type A port can be accessed by removing the System Control Box Cover; however, it is for power transfer only (5V/0.5A).

    USB Type C

    USB Type B connection

    Plug the USB device or storage drive into the USB Type C (USB Type C port) port on the display’s control panel.

    Note: The USB Type C port is for data transfer only.

    Network Connection

    LAN

    LAN connection

    To connect to a network, connect an Ethernet cable to your network, then connect the other end to the LAN port of the display.

    Note: The LAN port is accessed by removing the System Control Box Cover.

    Control Connection

    RS-232 (DB 9-pin)

    RS-232 connection

    When you use a RS-232 serial cable to connect the display to an external computer or control system, certain functions can be controlled remotely, such as: power on and off, volume adjustment, input select, brightness, and more.

    Note: The RS-232 port is accessed by removing the System Control Box Cover.

    RJ45 (LAN)

    RJ45 connection

    When you use an Ethernet cable to connect the display to an external computer or control system, certain functions can be controlled remotely, such as: power on and off, volume adjustment, input select, brightness, and more.

    Note: The RJ45 port is accessed by removing the System Control Box Cover.

    Audio Connection

    Audio Out

    Audio signal via Audio Out

    To play audio from the display through an external speaker, connect one end of an audio cable to the external speaker, and the other end to the display's Audio Out port.

    Note: The display is equipped with two Audio Out ports. One can be accessed externally, while the other is accessed by removing the System Control Box Cover.

    SPDIF

    Audio signal via SPDIF

    To play audio from the display through an external speaker, connect one end of an optical cable to the external speaker, and the other end to the display's SPDIF Out port.

    Note: The SPDIF Out port is accessed by removing the System Control Box Cover.