VPC-A31-O1 Using the Device

Selecting an Input Source

IFP Series

To select an input source:

1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
2. Press ▼/▲/◄/► on the remote control to select the PC source.
3. Press OK/ENTER on the remote control, or touch the input source directly.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

NOTE: The above image is for reference only and is subject to change without notice.

CDE Series

To select an input source:

1. Press INPUT on the remote control.
2. Press ▼/▲ on the remote control to select the PC source.
3. Press OK/ENTER on the remote control.
4. Press EPG/BACK on the remote control to exit.

NOTE: The above image is for reference only and is subject to change without notice.

IFPG1 Series

To select an input source:

1. Press INPUT on the front panel.
2. In the OSD Menu, touch INPUT.
3. Touch the PC input source directly.
4. Touch a blank area outside of the menu to exit.

NOTE: The above image is for reference only and is subject to change without notice.

Initial Launch Setup

When you first turn ON your ViewBoard, an initial setup wizard will launch.

1. Choose your preferred Language.

2. Adjust accessibility features as needed.

3. Setup and connect to a network.

4. Set and adjust the Date and Time as needed.

5. Copy your apps and data from another device to the ViewBoard or tap Don’t copy to continue without copying anything.

6. Sign in with a Google account, or tap Skip to continue without signing in.

7. Accept or decline the Google services.

8. Set a PIN to setup a Screen lock, or tap Skip to continue without setting one.