• Print Print

VB-CAM-201 Network

From ViewSonic Documentation
Revision as of 05:42, 21 July 2022 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_VB-CAM-201 |1=VB-CAM-201_Introduction |2=VB-CAM-201_Initial_Setup |3=VB-CAM-201_Making_Connections |4=VB-CAM-201_Using_the_Camera |5=VB-CAM-201_Netw...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VB-CAM-201 Network
Introduction
Initial Setup
Making Connections
Using the Camera
Network
Appendix
Regulatory and Service Information

Getting the Camera's IP Address

NOTE: The Camera IP address, by default, is set as 'Fixed IP address'. Once you follow the below steps to connect to the camera, you can adjust the setting to 'Dynamic IP address' and let your Router/DHCP server assign the network setting to the camera automatically.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VB-CAM-201_Network&oldid=19926"