• Print Print

VPC-A31-O1 Initial Setup

From ViewSonic Documentation
Revision as of 10:50, 14 June 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_VPC-A31-O1 |1=VPC-A31-O1_Introduction |2=VPC-A31-O1_Initial_Setup |3=VPC-A31-O1_Making_Connections |4=VPC-A31-O1_Using_the_Device |5=VPC-A31-O1_Appendix |6=VPC-A31-O1_Regulatory_and_Service_Information }} </noinclude> =Installing the VPC-A31-O1= <ol><li>Remove the slot-in PC cover of the display.</li> <div class="res-img">400px</div> <li>Using the handle of the VPC-A31-O1, carefully insert it into the PC s...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
VPC-A31-O1 Initial Setup
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Installing the VPC-A31-O1

  1. Remove the slot-in PC cover of the display.
  2. Using the handle of the VPC-A31-O1, carefully insert it into the PC slot of the display.
  3. Secure the VPC-A31-O1 to the display with the two (2) included screws.
    4. NOTE: Please note that the three (3) antennas must be installed on the VPCA31-O1.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC-A31-O1_Initial_Setup&oldid=28117"