• Print Print

VB-STND-008 Making Connections: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 20: Line 20:
=Connecting to the Control Pad=
=Connecting to the Control Pad=
Connect the Control Pad to the Trolley Cart via the RJ45 Port.
Connect the Control Pad to the Trolley Cart via the RJ45 Port.
:'''NOTE:''' The Control Pad has a magnet on the back. The Control Pad can be attached to any metal zone on the Trolley Cart. Make sure the attached area does not obstruct the Lift functions.
:'''NOTE:''' The Control Pad has a magnet on the back. The Control Pad can be attached to any metal surface on the Trolley Cart. Make sure the attached area does not obstruct the Lift functions.
<div class="res-img">[[File:VB-STND-008_Connect_Control_Pad.png|500px]]</div>
<div class="res-img">[[File:VB-STND-008_Connect_Control_Pad.png|500px]]</div>


Revision as of 02:27, 13 October 2023

VB-STND-008 Making Connections
Introduction
Initial Setup
Making Connections
Controlling the Lift
Appendix
Regulatory and Service Information
Safety Precautions
Troubleshooting

Connecting to Power

  1. Connect the power cord to the Trolley Cart.
  2. Plug the power cord plug into a power outlet.
  3. Use the cord clamp to secure the cords in place.

Connecting to the Control Pad

Connect the Control Pad to the Trolley Cart via the RJ45 Port.

NOTE: The Control Pad has a magnet on the back. The Control Pad can be attached to any metal surface on the Trolley Cart. Make sure the attached area does not obstruct the Lift functions.

Connecting to the IFP

  1. Connect the IFP to the AC power output of the Trolley Cart.
  2. Connect the USB Type A cord to both the IFP and the Trolley Cart.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VB-STND-008_Making_Connections&oldid=30918"