• Print Print

LD135-152 Trolley Control Panel: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
No edit summary
No edit summary
Line 14: Line 14:
<div class="res-img">[[File:LD135-152_Trolley_Control_Panel.png]]</div>
<div class="res-img">[[File:LD135-152_Trolley_Control_Panel.png]]</div>
# '''Instructions on Preset Lifting Height'''
# '''Instructions on Preset Lifting Height'''
::* Initial preset lifting height: 4 groups of preset data, i.e. 1/2/3/4 correspond to 0% / 50% / 75% / 100% height respectively.
::* Initial preset lifting height: 4 groups of preset data, i.e. '''1/2/3/4''' correspond to 0% / 50% / 75% / 100% height respectively.
::* Erasing of preset height data: data to be stored for more than 10 years. When new parameters are set, old parameters will be automatically erased.
::* Erasing of preset height data: data to be stored for more than 10 years. When new parameters are set, old parameters will be automatically erased.
::* How to preset height: at any height (unavailable under the reset and error status), the current height parameters can be preset into keys 1-4.
::* How to preset height: at any height (unavailable under the reset and error status), the current height parameters can be preset into keys '''1-4'''.
{|  
:{|  
|-
|-
|For example: set 30 into key '''2''':
|For example: set 30 into key '''2''':
Line 32: Line 32:
|}
|}


<ol start="2"><li> '''How to Use Preset Height'''</li>
At any height (unavailable under the reset and error status), keys '''1-4''' may be used to quickly reach the preset height. If the current height has reached such preset height, no actions will be performed.</ol><br />


<ol start="3"><li>'''How to Change the Height'''</li>
* Use the '''Up''' key to lift the display. The lift will automatically stop upon reaching the height limit. Please note, the '''Up''' key is a “click to act” key, i.e., upon releasing the key the lift will not immediately stop. Instead, it will slow down for a short distance then stop.
* Use the '''Down''' key to lower the display. The lift will automatically stop upon reaching the height limit. Please note, the '''Down''' key is a “click to act” key, i.e., upon releasing the key the lift will not immediately stop. Instead, it will slow down for a short distance then stop.</ol><br />
<ol start="4"><li>'''System Resetting'''</li>
Resetting Reminding: when the information window displays ''RST'' or other error codes, causing the pillar to not be lifted up to the maximum height, it needs to be manually operated to reset the entire system.</ol><br />
'''How to Reset:'''
# When the information window displays ''RST'' hold the '''Down''' key, and the pillar will start to lower. After the ''RST'' displaying in the window disappears, the displayed height is at its minimum value.
# When the height displayed in the information window is at its minimum value, hold the '''Down''' key for at least 5 seconds.
::<small>'''NOTE:''' During resetting and lifting operations, please be aware of any person or object that may be nearby or under the display to avoid harm or damage.</small>




Revision as of 03:11, 15 June 2022

LD135-152 Trolley Control Panel
Introduction
Remote Control
Trolley Control Panel
Flight Case Handling
Flight Case Unboxing
Flight Case Packing
Connecting Devices
Using the Display
[[{{{9}}}|On-Screen Display Menu]]
[[{{{10}}}|Pre-installed Applications]]
[[{{{11}}}|Specifications]]
[[{{{12}}}|Regulatory and Service Information]]
Safety Precautions
Troubleshooting
Maintenance

Control Panel for Motorized Trolley Cart

  1. Instructions on Preset Lifting Height
  • Initial preset lifting height: 4 groups of preset data, i.e. 1/2/3/4 correspond to 0% / 50% / 75% / 100% height respectively.
  • Erasing of preset height data: data to be stored for more than 10 years. When new parameters are set, old parameters will be automatically erased.
  • How to preset height: at any height (unavailable under the reset and error status), the current height parameters can be preset into keys 1-4.
For example: set 30 into key 2:
Press the S key to display SET.
Within 2 seconds, before SET disappears, press 2 .
When S-2 is displayed, the setting is over and will return to the previous display.
  1. How to Use Preset Height
    2. At any height (unavailable under the reset and error status), keys 1-4 may be used to quickly reach the preset height. If the current height has reached such preset height, no actions will be performed.


  1. How to Change the Height
    • Use the Up key to lift the display. The lift will automatically stop upon reaching the height limit. Please note, the Up key is a “click to act” key, i.e., upon releasing the key the lift will not immediately stop. Instead, it will slow down for a short distance then stop.
    • Use the Down key to lower the display. The lift will automatically stop upon reaching the height limit. Please note, the Down key is a “click to act” key, i.e., upon releasing the key the lift will not immediately stop. Instead, it will slow down for a short distance then stop.


  1. System Resetting
    2. Resetting Reminding: when the information window displays RST or other error codes, causing the pillar to not be lifted up to the maximum height, it needs to be manually operated to reset the entire system.


How to Reset:

  1. When the information window displays RST hold the Down key, and the pillar will start to lower. After the RST displaying in the window disappears, the displayed height is at its minimum value.
  2. When the height displayed in the information window is at its minimum value, hold the Down key for at least 5 seconds.
NOTE: During resetting and lifting operations, please be aware of any person or object that may be nearby or under the display to avoid harm or damage.
Retrieved from "https://manuals.viewsonic.com/index.php?title=LD135-152_Trolley_Control_Panel&oldid=19173"