VB-STND-008 Controlling the Lift

VB-STND-008 Controlling the Lift

Introduction

Initial Setup

Making Connections

Controlling the Lift

Appendix

Regulatory and Service Information

Safety Precautions

Troubleshooting

Overview

This section will introduce how to adjust the height and angle of the Trolley Cart by using the Lift/Tilt function.
There are three ways to control the Lift:

• Using the Trolley Cart Control Panel.
• Using the Control Pad.
• Using the Application on the IFP.

Using the Trolley Cart Control Panel or Control Pad

Item	Icon	Description
Lift Up		Press and hold to raise the VB-STND-008.
Lift Down		Press and hold to lower the VB-STND-008.
Tilt Up		Press and hold to tilt the VB-STND-008 backwards.
Tilt Down		Press and hold to tilt the VB-STND-008 forwards.

Using the Application on the IFP

1. Select the More Options Icon (...) from the side tool bar.

2. Select Trolley Cart Control.

3. Adjust the height of the Trolley Cart accordingly.

Item	Icon	Description
Lift Up		Press and hold to raise the VB-STND-008.
Lift Down		Press and hold to lower the VB-STND-008.
Tilt Down		Press and hold to tilt the VB-STND-008 forward.
Tilt Up		Press and hold to tilt the VB-STND-008 backward.
Preset Position 1		Adjust the Lift to desired height. Long press to save current height as Preset Position 1.
Preset Position 2		Adjust the Lift to desired height. Long press to save current height as Preset Position 2.
Preset Position 3		Adjust the Lift to desired height. Long press to save current height as Preset Position 3.
Stop		When using the Preset Position function, the Lift will adjust to the saved height. If you want to stop this process, press to stop height adjustment and motor movement.