LS710HD Initial Setup

From ViewSonic Documentation
Jump to: navigation, search

Choosing a Location - Projector Orientation

Personal preference and room layout will decide the installation location. Consider the following:

  • Size and position of your screen.
  • Location of a suitable power outlet.
  • Location and distance between the projector and other equipment.

The projector is designed to be installed in one of the following locations:

Location Description
Front The projector is placed near the floor in front of the screen.
Front Ceiling The projector is suspended upside-down from the ceiling in front of the screen.
Rear[1] The projector is placed near the floor behind the screen.
Rear Ceiling[1] The projector is suspended upside-down from the ceiling behind the screen.
  1. 1.0 1.1 A rear projection screen is required.

Projection Dimensions

NOTE: (e) = Screen | (f) = Center of Lens

16:9 Image on a 16:9 Screen

(a) Screen Size (b) Projection Distance (c) Image Height (d) Vertical Offset
min. max.
in. mm in. mm in. mm in. mm in. mm
40 1016 17.29 439 17.29 439 19.61 498 3.14 80
50 1270 21.62 549 21.62 549 24.50 622 3.92 100
60 1524 25.94 659 25.94 659 29.40 747 4.70 119
70 1778 30.26 769 30.26 769 34.30 871 5.49 139
80 2032 34.58 878 34.58 878 39.20 996 6.27 159
90 2286 38.91 988 38.91 988 44.10 1120 7.06 179
100 2540 43.23 1098 43.23 1098 49.00 1245 7.84 199
110 2794 47.55 1208 47.55 1208 53.90 1369 8.62 219
120 3048 51.88 1318 51.88 1318 58.80 1494 9.41 239
130 3302 56.20 1427 56.20 1427 63.70 1618 10.19 259
140 3556 60.52 1537 60.52 1537 68.60 1742 10.98 279
150 3810 64.85 1647 64.85 1647 73.50 1867 11.76 299
200 5080 86.46 2196 86.46 2186 98.10 2492 15.70 399
250 6350 108.08 2745 108.08 2745 122.60 3114 19.62 498
300 7633 129.92 330 129.92 3300 147.30 3741 23.57 599
NOTE:
  • These figures are for reference purposes only. Please refer to the actual projector for the precise dimensions.
  • It is recommended that if you intend to permanently install the projector to physically test the projection size and distance using the actual projector before you permanently install it.

16:9 Image on a 4:3 Screen

(a) Screen Size (b) Projection Distance (c) Image Height (d) Vertical Offset
min. max.
in. mm in. mm in. mm in. mm in. mm
40 1016 15.87 403 15.87 403 18.00 457 2.88 73
50 1270 19.84 504 19.84 504 22.50 572 3.60 91
60 1524 23.81 605 23.81 605 27.00 686 4.32 110
70 1778 27.78 706 27.78 706 31.50 800 5.04 128
80 2032 31.74 806 31.74 806 36.00 914 5.76 146
90 2286 35.71 907 35.71 907 40.50 1029 6.48 165
100 2540 39.68 1008 39.68 1008 45.00 1143 7.20 183
110 2794 43.65 1109 43.65 1109 49.50 1257 7.92 201
120 3048 47.62 1209 47.62 1209 54.00 1372 8.64 219
130 3302 51.58 1310 51.58 1310 58.50 1486 9.36 238
140 3556 55.55 1411 55.55 1411 63.00 1600 10.08 256
150 3810 59.52 1512 59.52 1512 67.50 1715 10.80 274
200 5080 79.36 2016 79.36 2016 90.00 2286 14.40 366
250 6350 99.20 2520 99.20 2520 112.50 2858 18.00 457
300 7633 119.25 3029 119.25 3029 135.24 3435 21.64 550
NOTE:
  • These figures are for reference purposes only. Please refer to the actual projector for the precise dimensions.
  • It is recommended that if you intend to permanently install the projector to physically test the projection size and distance using the actual projector before you permanently install it.

Mounting the Projector

NOTE: If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate.
  1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.
  2. Ensure the screws used to attach the mount to the projector meet the following specifications:
    • Screw type: M4 x 10
    • Maximum Screw Length: 10 mm
CAUTION
  • Avoid installing the projector near a heat source or air conditioner.
  • Keep at least a 10 cm (3.9 in.) gap between the ceiling and the bottom of the projector.

Using the Security Bar

To help prevent the projector from being stolen, use a security slot locking device to secure the projector to a fixed object.