Sub-menu |
---|
User |
TV |
Movie |
Presentation |
LDP216-251 On-Screen Display Menu
On-Screen Display (OSD) Menu Operation
Use the On-Screen Display (OSD) Menu to adjust various settings.
- NOTE: The OSD Menu is only available when there is an input source (e.g., HDMI).
To open and operate the OSD Menu:
- Press the MENU button on the remote control.
- Press ▼/▲/◄/► on the remote control to select menu items or adjust values.
- Press OK to confirm your selection.
- Press the RETURN button to go back to the previous menu level.
- Press the MENU button to exit the OSD Menu.
On-Screen Display (OSD) Menu Tree
Sub-menu | Menu Option |
---|---|
Aspect Ratio | Auto |
4:3 | |
16:9 | |
Native | |
Brightness | (-/+, 0~100) |
Contrast | (-/+, 0~100) |
Tint | (-/+, -50~50) |
Saturation | (-/+, 0~100) |
Sharpness | (-/+, 0~20) |
Gamma | Dark |
Middle | |
Bright | |
Color Temp | User |
Standard | |
Cool | |
Warm | |
Reset |
Sub-menu | Menu Option |
---|---|
HDR | Auto |
SDR | |
EOTF | Dark |
Middle | |
Bright | |
HDMI Setting | Auto |
Full | |
Limited |
Sub-menu | Menu Option |
---|---|
Audio Mode | User |
Standard | |
Vivid | |
Sports | |
Movie | |
Music | |
News | |
Auto | |
EQ_120Hz | (-/+, 0~100) |
EQ_500Hz | (-/+, 0~100) |
EQ_1.5KHz | (-/+, 0~100) |
EQ_10KHz | (-/+, 0~100) |
Reset | |
Audio Volume | (-/+, -50~50) |
Mute | On |
Off |
Sub-menu | Menu Option |
---|---|
Off | |
PIP | Sub Picture on Top Left |
Sub Picture on Top Right | |
Sub Picture on Bottom Left | |
Sub Picture on Bottom Right | |
PBP | Windows x 2 |
Windows x 3 | |
Windows x 4 |
Sub-menu |
---|
Source |
Resolution |
HDR |
On-Screen Display (OSD) Menu Options
Color Mode
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the Color Mode menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
- NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option | Description |
---|---|
Color Mode | Standard User TV Movie Presentation |
Display Mode
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the Display Mode menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
- NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option | Description |
---|---|
Aspect Ratio | The Aspect Ratio is the ratio of the image width to the image height.
Auto 4:3 16:9 Native |
Brightness | The higher the value, the brighter the image. Lower values will result in a darker image. |
Contrast | Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment. |
Tint | The higher the value, the more greenish the picture becomes. The lower the value, the more reddish the picture becomes. |
Saturation | Refers to the amount of that color in a video picture. Lower settings produce less saturated colors; in fact, a setting of “0” removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic. |
Sharpness | A high value results in a sharper picture; a low value softens the picture. |
Gamma | Manually adjust the brightness level of the monitor’s grayscale levels. |
Color Temp | Manually adjust the red, green, and blue values. |
Reset | Return the Display Mode settings to their default values. |
Advanced Mode
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the Advanced Mode menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
- NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option | Description |
---|---|
HDR | SDR Auto |
EOTF | Automatically adjusts the brightness levels of your image according to the input source. You can also manually select a brightness level to display better picture quality. |
HDMI Setting | Auto Full Limited |
Speaker
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the Speaker menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
- NOTE: Some sub-menu options may have another sub-menu layer.
Menu Option | Description |
---|---|
Audio Mode | Music Movie User |
Reset | Return the Speaker settings to their default values. |
Audio Volume | Adjust the volume level. |
Mute | Toggle ON to turn off the speaker. |
PIP/PBP Mode
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the PIP/PBP Mode menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-men.
Menu Option | Description |
---|---|
PIP/PBP Setup | Off PIP PBP |
Information
- Press MENU on the remote control to display the OSD Menu.
- Then press OK or use ▼/▲/◄/► on the remote control to select the Information menu.
- Press ▼/▲ to select the menu option. Then press OK to display its sub-menu, or press ◄/► to adjust/select the setting.
Menu Option | Description |
---|---|
Information | View Input Source, Resolution, and HDR information.
|