IFP7552-2 On-Screen Display Menu

    From ViewSonic User Guide Database
    IFP7552-2 On-Screen Display Menu
    Introduction
    Remote Control
    Using Gestures
    Connecting Devices
    Using the ViewBoard
    On-Screen Display Menu
    ViewBoard Settings
    Pre-installed Applications
    RS-232 Protocols
    Specifications
    Regulatory and Service Information
    Safety Precautions
    Troubleshooting
    Maintenance

    On-Screen Display (OSD) Menu - General Settings

    Access Input, Display, Audio and other general settings through the OSD Menu.

    Input Menu
    Input Settings
    Display Menu
    Display Settings
    Audio Menu
    Audio Settings

    Open the OSD Menu by pressing INPUT on the remote control or touching the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar.

    Launching the OSD Menu

    Input Settings

    Input Settings

    To select an Input Source:

    1. Press INPUT on the remote control or touch the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar to display the Input Settings menu.
    2. Press ▼/▲/◄/► on the remote control to select the input source you want.
      3. NOTE: The PC source will only be visible when a slot-in computer is installed.
    3. Press ENTER on the remote control, or touch the input source.
    4. Press BACK on the remote control, or touch a blank area outside of the menu to exit.


    To adjust the brightness:

    Adjust the Brightness
    1. Press INPUT on the remote control or touch the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar to display the Input Settings menu.
    2. Touch and drag the brightness slider directly to adjust the backlight value.
    3. Press BACK on the remote control, or touch a blank area outside of the menu to exit.


    To adjust the volume:

    Adjust the Volume
    1. Press INPUT on the remote control or touch the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar to display the Input Settings menu.
    2. Touch and drag the volume slider directly to adjust the value, or press +/- on the remote control to adjust. Additionally, pressing Mute on the remote control will mute/unmute the volume.
    3. Press BACK on the remote control, or touch a blank area outside of the menu to exit.

    Display Settings

    Display Settings
    Display Settings
    Display Settings
    Display Settings

    To adjust the display settings:

    1. Press INPUT on the remote control or touch the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar to display the Input Settings menu. Then select the Display tab.
    2. Press ▼/▲/◄/► on the remote control to select the menu option you want.
    3. Press ENTER on the remote control to confirm or press ◄/► to adjust the menu option. Additionally, touch/adjust the menu option directly.
    4. Press BACK on the remote control, or touch a blank area outside of the menu to exit.

    Display Settings - Menu Options

    Item Description
    Auto Brightness Automatic brightness adjustment. Adjusts maximum brightness according to ambient light levels.
    Energy Saving Enable to reduce power consumption.
    Low Blue Light Adjusts the filter that blocks high-energy blue light for a more comfortable viewing experience.
    Picture Mode Select a predefined picture setting.
    Mode Description
    Standard Default picture mode.
    Bright Maximizes the brightness of the display. This mode is suitable for environments where extra-high brightness is required (e.g., well-lit rooms).
    Brilliant A high brightness level with lower contrast level.
    Custome Customize the picture settings.
    Scale Adjust the size of the text, applications, and other on-screen items.
    Contrast Adjusts the difference between the image background (black level) and the foreground (white level). Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
    Tone Adjust the color tone value.
    Sharpness A high value results in a sharper picture; a low value softens the picture.
    Color Temperature Mode Adjust the color temperature value.
    VGA Setting

    (for VGA input only)

    		Adjust the analog picture settings when connected via the VGA port.
    Advanced Settings

    HDMI Out
    Toggle HDMI Out support ON or OFF.

    HDMI Out Resolution
    Set the display resolution for HDMI Out connections.

    Audio Settings

    Audio Settings
    Audio Settings

    To adjust the audio settings:

    1. Press INPUT on the remote control or touch the Input Source icon (IFP52-2 Toolbar Icon Input.png) of the Toolbar to display the Input Settings menu. Then select the Audio tab.
    2. Press ▼/▲/◄/► on the remote control to select the menu option you want.
    3. Press ENTER on the remote control to confirm or press ◄/► to adjust the menu option. Additionally, touch/adjust the menu option directly.
    4. Press BACK on the remote control, or touch a blank area outside of the menu to exit.

    Audio Settings - Menu Options

    Item Description
    Sound Mode Select a predefined audio setting.
    Mode Description
    Standard Default audio mode.
    Meeting Room Ideal for meetings. Higher bass, lower treble levels.
    Classroom Ideal for the classroom. Low bass and treble levels.
    Cinema Ideal for movies.
    Custom Customize the audio settings.
    Volume Increase or decrease the display’s volume level.
    Bass Increase or decrease the bass level (lower-pitched sounds).
    Treble Increase or decrease the treble level (higher-pitched sounds).
    Balance Adjust the left/right speaker balance.
    Mute Toggle mute ON or OFF.

    Low Blue Light Filter and Eye Health

    The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience.

    Blue Light Filter

    Calculating Breaks
    When viewing screens for extended periods, it is recommended to take periodic breaks from viewing. Short breaks of at least 10 minutes are recommended after one (1) hour of continuous viewing.

    Taking shorter, more frequent breaks are generally more beneficial than longer, less frequent breaks.

    Focus Fatigue (20-20-20 Rule)
    To reduce the risk of eye fatigue by constantly looking at the screen, look away from the screen at least every 20 minutes and gaze at a distant object (at least 20 feet away) for at least 20 seconds.

    Looking at Distant Objects
    While taking breaks, users can further reduce eye strain and dryness by focusing on objects that are further away from them for 10-15 seconds, then gaze at something up close for 10-15 seconds. Repeat this up to 10 times. This exercise reduces the risk of your eyes’ focusing ability to “lock up” after prolonged computer work.

    Eye and Neck Exercises
    Eye Exercises
    Eye exercises can help minimize eye strain. Slowly roll your eyes to the left, right, up, and down. Repeat as many times as needed.

    Eye Exercises

    Neck Exercises
    Neck exercises can also help minimize eye strain. Relax your arms and let them hang at your sides, bend forward slightly to stretch the neck, turn your head to the right and to the left. Repeat as many times as needed.

    Applications

    Much like any smart phone or tablet you can install several different applications from the installed Google Play Store.

    Applications

    Applications can be accessed from the Toolbar, directly from the Home Screen via shortcuts, or by selecting the All Apps icon (All Apps).

    NOTE: The following included application descriptions are not a comprehensive list and will vary by the user.
    Icon Description
    MVB Display
    		 myViewBoard Display

    Wirelessly mirror screens to a larger display.

    MVB Manager
    		 myViewBoard Manager

    Remotely manage multiple installations of ViewSonic devices.

    MVB Whiteboard
    		 myViewBoard Whiteboard

    A digital whiteboarding application.

    Settings
    		 Settings

    Access the System Settings.

    vCast
    		 vCast

    Working with ViewBoard Cast software, receive vCastSender laptop screens (Windows/Mac/Chrome) and mobile (iOS/Android) users’ screens, photos, videos, annotations, and camera(s).


    Retrieved from "https://manuals.viewsonic.com/index.php?title=IFP7552-2_On-Screen_Display_Menu&oldid=31646"