ID1230 Using the Pen Display

Turning the Device On/Off

1. Ensure the display is connected properly to the computer.
2. Press the Power key to turn on the display.
3. To turn the display off, press the Power key again.

NOTE: The display will still consume some power as long as it is connected. If the display is not being used for a long period of time, please disconnect it.

On-Screen Display (OSD) Menu

Press the Menu key to activate the On-Screen Display (OSD) Menu.

Menu		Description
	Brightness	Adjust the contrast or brightness level.
	Image	Manually set a variety of image quality adjustments.
	Color Temperature	Select one of the preset color settings.
	OSD Setting	Adjust On-Screen Display (OSD) settings.
	Reset	Returns the adjustments back to factory settings.
	Miscellaneous	Adjust the level, or mute the volume. Select the input source.

Configuring the Settings

General Operations

1. Press the Menu key to display the On-Screen Display (OSD) Menu.
2. Press the ▼ or ▲ key to select the main menu. Then press the Menu key to enter the selected menu.
3. Press the ▼ or ▲ key to select the desired menu option. Then press the Menu key to enter the sub-menu.
4. Press the ▼ or ▲ key to adjust/select the setting. Then press the Menu key to confirm.

NOTE: Certain menu option adjustments do not require the user to press the Menu key to confirm the selection.

On-Screen Display (OSD) Menu Tree

BrightnessImageColor TemperatureOSD SettingResetMisc

Sub-menu	Menu Option
Brightness	(-/+, 0~100)
Contrast	(-/+, 0~100)
Eco Mode	Standard
	Text
	Game
	Movie
	EyeSaver
DCR	On
	Off

Sub-menu	Menu Option
H. Position	(-/+, 0~100)
V. Position	(-/+, 0~100)
Clock	(-/+, 0~100)
Phase	(-/+, 0~100)
Aspect	Auto
	Wide
	4:3

Sub-menu	Menu Option
Color Temperature	Warm
	Normal
	Cool
	User	Red	(-/+, 0~100)
		Green	(-/+, 0~100)
		Blue	(-/+, 0~100)
Low Blue Light Mode	On
	Off

Sub-menu	Menu Option
Language	English
	Français
	Deutsch
	简体中文
	Italiano
	Español
	Portuguese
	Türkçe
	Polish
	Dutch
	Русский
	한국어
OSD H. Position	(-/+, 0~100)
OSD V. Position	(-/+, 0~100)
OSD Timeout	(-/+, 5~120)
Transparency	(-/+, 0/25/50/75/100)

Sub-menu
Image Auto Adjust
Color Auto Adjust
Reset
Auto Power Down

Sub-menu	Menu Option
Hot Key Type	ECO+DCR
	BRI+CON
	ASP+ECO
	SOU+VOL
Signal Source	VGA
	DVI
	HDMI
Mute	On
	Off
Volume	(-/+, 0~100)