• Print Print

ID1230 Setting the Display Area

From ViewSonic Documentation
Revision as of 09:07, 8 June 2023 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Pen_Display_GD1330 |1=ID1230_Introduction |2=ID1230_Making_Connections |3=ID1230_Drive_Installation_Use_and_Removal |4=ID1230_Setting_the_Display_Area |5=ID1230_Pen_Input_Area_Mapping |6=ID1230_Using_the_Pen_Display |7=ID1230_Specifications |8=ID1230_Regulatory_and_Service_Information }} </noinclude> =Setting the Display Area= After the pen display is connected to the computer, the Display settings will need to be adjusted. To access the compute...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
ID1230 Setting the Display Area
Introduction
Making Connections
Driver Installation, Use, and Removal
Setting the Display Area
Pen Input Area Mapping
Using the Pen Display
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Setting the Display Area

After the pen display is connected to the computer, the Display settings will need to be adjusted. To access the computer’s Display settings:

  • Go to: Start > Settings > System > Display, or
  • Right Click on the Desktop and select Display settings.

Once inside the Display settings, ensure the pen display is selected and:

  • Display orientation is set to Landscape or Portrait (depending on your preference), and
  • Multiple displays is set to Extend these displays.
Retrieved from "https://manuals.viewsonic.com/index.php?title=ID1230_Setting_the_Display_Area&oldid=27961"