• Print Print

PD0521 Setting the Display Area

From ViewSonic Documentation
Revision as of 10:09, 5 November 2021 by Rob.vsi (talk | contribs) (Created page with "<noinclude> {{Sticky_Menu_Pen_Display_No_Adj |1=PD0521_Introduction |2=PD0521_Making_Connections |3=PD0521_Using_the_Display |4=PD0521_Setting_the_Display_Area |5=PD0521_Pen_I...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
PD0521 Setting the Display Area
Introduction
Making Connections
Using the Display
Setting the Display Area
Pen Input Area Mapping
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

Setting the Display Area

After the pen display is connected to the computer, the Display settings will need to be adjusted. To access your computer’s Display settings:

  • Go to: Start > Settings > System > Display, or
  • Right Click on the Desktop and select Display settings.

Once inside the Display settings, ensure the pen display is selected and:

  • Display orientation is set to Landscape or Portrait (depending on your preference), and
  • Multiple displays is set to Extend these displays.
NOTE: Changing from anything but Landscape mode also requires a change in the Pen Display Driver settings (in ViewSign Console).
Retrieved from "https://manuals.viewsonic.com/index.php?title=PD0521_Setting_the_Display_Area&oldid=16226"