ID1230 Specifications

Technical Specifications

Item	Category	Specifications
Model	P/N.	GD1330
	No.	VS18342
LCD	Type	TFT Active Matrix, 1920 x 1080 LCD
	Display Size	33.02 cm, (13")
	Surface Treatment	Hard-coating (8H)
Resolution	Supported	1920 x 1080
Power	USB	DC 5V/2A, USB power supply
Operating Conditions	Temperature	0° C to 40° C (32° F to 122° F)
	Humidity	20% to 80% (non-condensing)
Storage Conditions	Temperature	-10° C to 60° C (14° F to 140° F)
	Humidity	10% to 90% (non-condensing)
Dimensions	Physical (W x H x D)	344 x 210 x 7 mm (13.54” x 8.27” x 0.28”)
Weight	Physical	0.815 kg (1.8 lbs)
Power Consumption	On	5W (Typical)
	Standby	< 1W

Pen

Item	Specifications
Type	Electromagnetic resonance
Power Supply	Battery-less
Resolution	5080 LPI (lines per inch)
Pressure Sensitivity	8192
Report Rate	Average 266 PPS (points per second)
Pen Tilt Angle	+/- 60°
OS Supported	Win10 (32/64 bit), Win8, Win 7, Win XP; Mac OS x 10.4 and above.

Accessories

Pen Holder Stand

When not in use, the EM Pen can be stored in the Pen Holder Stand.

Additionally, Pen Nibs and the Nib Removal Tools can be stored inside the Pen Holder Stand. To open the Pen Holder Stand, rotate it anti-clockwise.

Drawing Glove

For better performance and smoothness when drawing on the display, you can wear the supplied Drawing Glove.

Replacing a Pen Nib

When the pen nib gets too short or develops a sharp edge, it can be replaced with spare nibs.

To replace a pen nib:

1. Use the Nib Removal Tool to pull the old nib straight out of the pen.

2. Insert a new pen nib into the pen and push the nib in until it stops and is held firm.