ID1230 Using the Pen Display

Turning the Device On/Off

1. Ensure the display is connected properly to the computer.
2. Press the Power key to turn on the display.
3. To turn the display off, press the Power key again.

NOTE: The display will still consume some power as long as it is connected. If the display is not being used for a long period of time, please disconnect it.

On-Screen Display (OSD) Menu

Press the Menu key to activate the On-Screen Display (OSD) Menu.

Menu	Description
Contrast/Brightness	Adjust the contrast or brightness level.
Input Select	Select the input source.
Color Adjust	Select one of the preset color settings.
Information	Displays the timing mode coming from the graphics card in the computer, the LCD model number, the serial number, and the ViewSonic® website URL.
Manual Image Adjust	Manually set a variety of image quality adjustments.
Setup Menu	Adjust On-Screen Display (OSD) settings.
Memory Recall	Returns the adjustments back to factory settings.

Configuring the Settings

General Operations

1. Press the Menu key to display the On-Screen Display (OSD) Menu.
2. Press the ▼ or ▲ key to select the main menu. Then press the Menu key to enter the selected menu.
3. Press the ▼ or ▲ key to select the desired menu option. Then press the Menu key to enter the sub-menu.
4. Press the ▼ or ▲ key to adjust/select the setting. Then press the Menu key to confirm.

NOTE: Certain menu option adjustments do not require the user to press the Menu key to confirm the selection.

On-Screen Display (OSD) Menu Tree

Contrast/BrightnessInput SelectColor AdjustInformationManual Image AdjustSetup Menu

Sub-menu	Menu Option
Brightness	(-/+, 0~100)
Contrast	(-/+, 0~100)

Sub-menu
HDMI
Type C

Sub-menu	Menu Option
sRGB
Bluish
Cool
Native
Warm
User Color	Red	(-/+, 0~100)
	Green	(-/+, 0~100)
	Blue	(-/+, 0~100)

Sub-menu	Menu Option
Sharpness	(-/+, 0~100)
Dynamic Contrast	On
	Off
Response Time	Standard
	Advanced
	Ultra Fast
Aspect Ratio	4:3
	Full Screen
Overscan	On
	Off
Eco Mode	Standard
	Optimize
	Conserve
ViewMode
Blue Light Filter	(-/+, 0~100)

Sub-menu	Menu Option
Hot Key Type	ECO+DCR
	BRI+CON
	ASP+ECO
	SOU+VOL
Signal Source	VGA
	DVI
	HDMI
Mute	On
	Off
Volume	(-/+, 0~100)