VB-AUD-201 Specifications

From ViewSonic Documentation
Jump to: navigation, search

Technical Specifications

Model No. P/N
VS19004 VB-AUD-201
Item Category Specifications
LCD Type VA, Color a-Si TFT,

Active Matrix 1920 x 1080 LCD;
0.27156 (H)mm x 0.27156 (V)mm pixel pitch

Display Size 60 cm (23.6" viewable)
Color Filter RGB vertical stripe
Glass Surface Anti-Glare (Haze 25%), Hard Coating (3H)
Input Signal Video Sync Analog:
D-SUB: fh:24-86 kHz, fv:48-75 Hz

TMDS digital (100 Ω)

HDMI (v. 1.4): fh:24-86 kHz, fv:48-75 Hz
Compatibility PC up to 1920 x 1080
Macintosh up to 1920 x 1080
Recommended 1920 x 1080 @ 60Hz
Resolution[1] Supported
  • 1920 x 1080 @ 50, 60, 75Hz
  • 1680 x 1050 @ 60Hz
  • 1600 x 1200 @ 60Hz
  • 1600 x 900 @ 60Hz
  • 1440 x 900 @ 60, 75Hz
  • 1440 x 576 @ 50Hz
  • 1400 x 1050 @ 60, 75Hz
  • 1366 x 768 @ 60Hz
  • 1360 x 768 @ 60Hz
  • 1280 x 1024 @ 50, 60, 75Hz
  • 1280 x 960 @ 50, 60, 75Hz
  • 1280 x 800 @ 60, 75Hz
  • 1280 x 768 @ 50, 60, 75Hz
  • 1280 x 720 @ 50, 60Hz
  • 1152 x 900 @ 66Hz
  • 1152 x 870 @ 75Hz
  • 1152 x 864 @ 60, 75Hz
  • 1024 x 768 @ 50, 60, 70, 72, 75Hz
  • 1024 x 600 @ 60Hz
  • 848 x 480 @ 60Hz
  • 832 x 624 @ 75Hz
  • 800 x 600 @ 56, 60, 72, 75Hz
  • 720 x 576 @ 50Hz
  • 720 x 480 @ 60Hz
  • 720 x 400 @ 70Hz
  • 640 x 480 @ 50, 60, 66, 72, 75Hz
  • 640 x 400 @ 60, 70Hz
  • 640 x 350 @ 70Hz
Power Adapter[2] Input Voltage AC 100-240V, 50/60Hz (auto switch)
Display Area Full Scan

(H x V)

521.4 x 293.3 mm

(20.53” x 11.55”)

Operating Conditons Temperature 0° C to 40° C (32° F to 104° F)
Humidity 20% to 90% (non-condensing)
Altitude 16,404 feet (4.9 km)
Storage Conditions Temperature -20° C to 60° C (-4° F to 140° F)
Humidity 5% to 90% (non-condensing)
Altitude 40, 000 feet (12.1 km)
Dimensions Physical

(W x H x D)

540.5 x 404.9 x 176.9 mm

(21.3” x 15.9” x 6.9”)

Wall Mount Dimensions 75 x 75 mm
Weight Physical 2.9 kg (6.4 lbs)
Power Saving Modes On[3] 20W (Typical)
Off ≤ 0.3W
  1. Do not set the graphics card in your computer to exceed these timing modes; doing so may result in permanent damage to the display.
  2. Please use the power adapter from ViewSonic® or an authorized source only.
  3. The test condition follows EEI standards.