• Print Print

IFP6533 On-Screen Display Menu

From ViewSonic Documentation
Jump to: navigation, search
IFP6533 On-Screen Display Menu
Introduction
Remote Control
Using Gestures
Connecting Devices
Using the ViewBoard
On-Screen Display Menu
ViewBoard Settings
Pre-installed Applications
RS-232 Protocols
Specifications
Regulatory and Service Information
Safety Precautions
Troubleshooting
Maintenance

On-Screen Display (OSD) Menu - General Settings

Access Input, Display, Audio and other general settings through the OSD Menu.

Input Menu
Input Menu
Display Menu
Display Menu
Audio Menu
Audio Menu

Open the OSD Menu by touching the Menu icon () in the Toolbar or the Input Source icon () of the Control Bar.

Launching the OSD Menu

Input Settings

To select an Input Source:

  1. Press INPUT on the remote control or touch the Menu icon () from the Toolbar or the Input Source icon () of the Control Bar to display the Input Settings menu.
  2. Press ▼/▲/◄/► on the remote control to select the input source you want.
  3. Press ENTER on the remote control, or touch the input source.
  4. Press BACK on the remote control, or touch a blank area outside of the menu to exit.


To adjust the brightness:

Adjust the Brightness
  1. Press INPUT on the remote control or touch the Menu icon () from the Toolbar or the Input Source icon () of the Control Bar to display the Input Settings menu.
  2. Touch and drag the brightness slider directly to adjust the backlight value.
  3. Press BACK on the remote control, or touch a blank area outside of the menu to exit.


To adjust the volume:

Adjust the Volume
  1. Press INPUT on the remote control or touch the Menu icon () from the Toolbar or the Input Source icon () of the Control Bar to display the Input Settings menu.
  2. Touch and drag the volume slider directly to adjust the value, or press VOL +/VOL - on the remote control to adjust. Additionally, pressing Mute () on the remote control will mute/unmute the volume.
  3. Press BACK on the remote control, or touch a blank area outside of the menu to exit.

Display Settings

Display Menu
Display Menu
Display Menu

To adjust the display settings:

  1. Press INPUT on the remote control or touch the Menu icon () from the Toolbar or the Input Source icon () of the Control Bar to display the Input Settings menu. Then select the Display tab.
  2. Press ▼/▲/◄/► on the remote control to select the menu option you want.
  3. Press ENTER on the remote control to confirm or press ◄/► to adjust the menu option. Additionally, touch/adjust the menu option directly.
  4. Press BACK on the remote control, or touch a blank area outside of the menu to exit.

Display Settings - Menu Options

Item Description
Auto Brightness Automatic brightness adjustment. Adjusts maximum brightness according to ambient light levels.
Energy Saving Enable to reduce power consumption.
Eye Care Adjusts the filter that blocks high-energy blue light for a more comfortable viewing experience.
Paper Eye Care When “Low Blue Light” is enabled, adjust the Transparency to lower the brightness and warm the color temperature.
Picture Mode Select a predefined picture setting.
Mode Description
Standard Default picture mode.
Bright Maximizes the brightness of the display. This mode is suitable for environments where extra-high brightness is required (e.g., well-lit rooms).
Soft A high brightness level with lower contrast level.
Custome Customize the picture settings.
Brightness Adjusts background black levels of the screen image. The higher the value, the brighter the image. Lower values will result in a darker image.
Contrast Adjusts the difference between the image background (black level) and the foreground (white level). Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.
Saturation The amount of color in a picture. Lower settings produce less saturated colors; in fact, a setting of “0” removes that color from the image entirely. If the saturation is too high though, that color will be overpowering and unrealistic.
Sharpness A high value results in a sharper picture; a low value softens the picture.
Color Temperature Adjust the color temperature value.
Advanced Settings

Color Space
Choose the color space to use for color output.

Mode Description
Standard Default color space standard.
sRGB Precise color gamut and gamma of the sRGB standard.
AdobeRGB Precise color gamut and gamma of the Adobe RGB standard.
Display-P3 Precise color gamut and gamma of the Display-P3 standard.
DCI-P3 Precise color gamut and gamma of the DCI-P3 standard.
BT2020 Precise color gamut and gamma of the BT2020 standard.

HDMI Range
Select a suitable color range according to the color range setting of the connected output device.

Mode Description
Auto Detect the range of the input signal automatically.
Full Sets the color range from 0~255
Limited Sets the color range from 16~235

Pixel Shift
Reduce the possibility of screen burn-in. This setting allows the user to program the time between movements of the picture in minutes.

AI PQ
Automatically set the optimal resolution of the display.

Dynamic Backlight (DCR)
Automatically detects the image signal and intelligently controls the backlight brightness and color to improve on the ability to make the black blacker in a dark scene, and make the white whiter in a bright environment.

Audio Settings

Settings - HDMI & VGA Input Source

Press MENU on the remote control or select the setting icon next to the input source in Input Settings to launch the Settings menu. Settings include: Audio, Screen, Display, and Adjust.

Audio Settings

  1. Press ▼ on the remote control and select the Audio menu.
  2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
  3. Adjust the Volume, Bass, Treble, and Balance directly by touching and adjusting each value, or with the remote control by pressing OK to adjust the option.
  4. Touch the Mute slider directly to enable/disable mute, or press Mute on the remote control.
  5. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Screen Settings

  1. Press ▼ on the remote control and select the Screen menu.
  2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
  3. Adjust your preference by touching each value directly, or with the remote control by pressing OK.
  4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Display Settings

  1. Press ▼ on the remote control and select the Display menu.
  2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
  3. Adjust the Brightness, Contrast, Hue, and Sharpness directly by touching and adjusting each value, or with the remote control by pressing OK to adjust the option.
  4. Drag the blue light slider directly to adjust the blue light value.
  5. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Low Blue Light Filter and Eye Health

The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience.

NOTE: To meet TÜV Rheinland low blue light certification, the Display Settings must be:

  • Mode: Standard (Brightness and Contrast are 50)
  • Color Temperature: Filter
  • Blue light Filter: 0

Calculating Breaks
When viewing screens for extended periods, it is recommended to take periodic breaks from viewing. Short breaks of at least 10 minutes are recommended after one (1) hour of continuous viewing.

Taking shorter, more frequent breaks are generally more beneficial than longer, less frequent breaks.

Focus Fatigue (20-20-20 Rule)
To reduce the risk of eye fatigue by constantly looking at the screen, look away from the screen at least every 20 minutes and gaze at a distant object (at least 20 feet away) for at least 20 seconds.

Looking at Distant Objects
While taking breaks, users can further reduce eye strain and dryness by focusing on objects that are further away from them for 10-15 seconds, then gaze at something up close for 10-15 seconds. Repeat this up to 10 times. This exercise reduces the risk of your eyes’ focusing ability to “lock up” after prolonged computer work.

Eye and Neck Exercises
Eye Exercises
Eye exercises can help minimize eye strain. Slowly roll your eyes to the left, right, up, and down. Repeat as many times as needed.

Eye Exercises

Neck Exercises
Neck exercises can also help minimize eye strain. Relax your arms and let them hang at your sides, bend forward slightly to stretch the neck, turn your head to the right and to the left. Repeat as many times as needed.

Adjust Settings (VGA only)

  1. Press ▼ on the remote control and select the Adjust menu.
  2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
  3. Adjust your preference by touching each value directly, or with the remote control by pressing OK.
  4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
Retrieved from "https://manuals.viewsonic.com/index.php?title=IFP6533_On-Screen_Display_Menu&oldid=30195"