• Print Print

VP2786a-4K Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 67: Line 67:
</noinclude>
</noinclude>


=Installing the Shade Hood=
 
{{Note|The Shade Hood is an optional accessory.}}
<ol><li>Place the monitor upright on a flat, stable surface. Make sure the monitor is rotated to the landscape mode.</li>
<div class="res=img">[[File:VP2776_Shade_Hood_1.png|250px]]</div>
<li>Prepare the shade hood by folding the side panels down.</li>
<div class="res=img">[[File:VP2776_Shade_Hood_2.png|350px]]</div>
<li>Attach the shade hood to the top of the monitor by aligning the shape bar inside the hood with the one on top of the monitor. Repeat for the left and right sides.</li>
<div class="res=img">[[File:VP2776_Shade_Hood_3.png|400px]]</div>
<li>Press down on the shade hood to fix it firmly in place.</li></ol>


{{#seo:
{{#seo:
|title=ViewSonic Monitor
|title=ViewSonic Monitor
|title_mode=append
|title_mode=append
|keywords=VP2776T-4K, stand installation, wall mounting, VESA  
|keywords=VP2786a-4K, stand installation, wall mounting, VESA  
|description=How to install and uninstall the stand on the VP2776T-4K monitor.  
|description=How to install and uninstall the stand on the VP2786a-4K monitor.  
}}
}}


[[Category:VP2776T-4K]]
[[Category:VP2786a-4K]]

Revision as of 09:10, 4 September 2024

VP2786a-4K Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
On-Screen Display Menu Options
Advanced Features and Settings
Color Calibration
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Installing the Stand

  1. Place the monitor on a flat, stable surface with the screen facing down.
  2. Align and slide the upper hooks of the monitor stand into the stand mounting slots.
    3. Installing the stand
  3. Lift the monitor into its upright position on a flat, stable surface.
    4. Stand installation complete
Note: For safety and to ensure optimal performance, please position the monitor on a flat, stable surface. Failure to do so may lead to the monitor falling, causing damage to the monitor itself and/or posing a risk of personal injury.

Removing the Stand and Mounting the Monitor

Refer to the table below for the standard dimensions for mounting kits.

Note:
  • For use only with a UL certified mounting kit/bracket. To obtain a wall mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
  • Mounting kits are sold separately.
Maximum

Loading

Hole Pattern

(W x H)

Interface Pad

(W x H x D)

Pad Hole Screw

Specification

Screw

Quantity

14 kg 100 x 100 mm N/A N/A M4 x 10 mm 4
  1. Turn off the monitor and disconnect all cables.
  2. Place the monitor on a flat, stable surface with the screen facing down.
  3. Pull and hold the quick release tab and carefully lift the stand.
    4. Disengage the hooks
  4. Pull down slightly to disengage the hooks and remove the stand.
    5. Remove the stand
  5. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four screws (M4 x 10 mm).
    6. VESA mounting points
  6. Follow the instructions that come with the optional mounting kit to mount the monitor.


Using the Security Slot

Retrieved from "https://manuals.viewsonic.com/index.php?title=VP2786a-4K_Initial_Setup&oldid=44682"