IFP6533 On-Screen Display Menu

On-Screen Display (OSD) Menu - General Settings

Access Input, Display, Audio and other general settings through the OSD Menu.

Input Menu	Display Menu
Audio Menu

Open the OSD Menu by touching the Menu icon () in the Toolbar or the Input Source icon () of the Control Bar.

Input Settings

To select an Input Source:

1. Press INPUT on the remote control or touch the Menu icon ( ) from the Toolbar or the Input Source icon ( ) of the Control Bar to display the Input Settings menu.
2. Press ▼/▲/◄/► on the remote control to select the input source you want.
3. Press Enter on the remote control, or touch the input source.
4. Press Back on the remote control, or touch a blank area outside of the menu to exit.

To adjust the brightness:

To adjust the volume:

Settings - HDMI & VGA Input Source

Press MENU on the remote control or select the setting icon next to the input source in Input Settings to launch the Settings menu. Settings include: Audio, Screen, Display, and Adjust.

Audio Settings

1. Press ▼ on the remote control and select the Audio menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust the Volume, Bass, Treble, and Balance directly by touching and adjusting each value, or with the remote control by pressing OK to adjust the option.
4. Touch the Mute slider directly to enable/disable mute, or press Mute on the remote control.
5. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Screen Settings

1. Press ▼ on the remote control and select the Screen menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust your preference by touching each value directly, or with the remote control by pressing OK.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Display Settings

1. Press ▼ on the remote control and select the Display menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust the Brightness, Contrast, Hue, and Sharpness directly by touching and adjusting each value, or with the remote control by pressing OK to adjust the option.
4. Drag the blue light slider directly to adjust the blue light value.
5. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.

Low Blue Light Filter and Eye Health

The Blue Light Filter blocks high-energy blue light for a more comfortable viewing experience.

NOTE: To meet TÜV Rheinland low blue light certification, the Display Settings must be:

• Mode: Standard (Brightness and Contrast are 50)
• Color Temperature: Filter
• Blue light Filter: 0

Calculating Breaks
When viewing screens for extended periods, it is recommended to take periodic breaks from viewing. Short breaks of at least 10 minutes are recommended after one (1) hour of continuous viewing.

Taking shorter, more frequent breaks are generally more beneficial than longer, less frequent breaks.

Focus Fatigue (20-20-20 Rule)
To reduce the risk of eye fatigue by constantly looking at the screen, look away from the screen at least every 20 minutes and gaze at a distant object (at least 20 feet away) for at least 20 seconds.

Looking at Distant Objects
While taking breaks, users can further reduce eye strain and dryness by focusing on objects that are further away from them for 10-15 seconds, then gaze at something up close for 10-15 seconds. Repeat this up to 10 times. This exercise reduces the risk of your eyes’ focusing ability to “lock up” after prolonged computer work.

Eye and Neck Exercises
Eye Exercises
Eye exercises can help minimize eye strain. Slowly roll your eyes to the left, right, up, and down. Repeat as many times as needed.

Neck Exercises
Neck exercises can also help minimize eye strain. Relax your arms and let them hang at your sides, bend forward slightly to stretch the neck, turn your head to the right and to the left. Repeat as many times as needed.

Adjust Settings (VGA only)

1. Press ▼ on the remote control and select the Adjust menu.
2. Press ▼/▲/◄/► on the remote control or directly touch the option to select it.
3. Adjust your preference by touching each value directly, or with the remote control by pressing OK.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.