• Print Print

VPC-A31-O1 Using the Device: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
← Older editNewer edit →
Line 29: Line 29:


==IFPG1 Series==
==IFPG1 Series==
<div class="res-img">[[File:VPC-A31-O1_Input_IFPG1.png|500px]]</div>
<div class="res-img">[[File:VPC-A31-O1_Input_IFPG1.png|200px]]</div>
To select an input source:
To select an input source:
<ol><li>Press '''INPUT''' on the front panel.</li>
<ol><li>Press '''INPUT''' on the front panel.</li>

Revision as of 02:41, 15 June 2023

VPC-A31-O1 Using the Device
Introduction
Initial Setup
Making Connections
Using the Device
Settings
Pre-installed Applications and Settings
[[{{{7}}}|Appendix]]
[[{{{8}}}|Regulatory and Service Information]]

Selecting an Input Source

IFP Series

To select an input source:

  1. Press INPUT on the remote control, press the setting button on the front panel, or press the Settings icon from the toolbar to display the Input Settings menu.
  2. Press ▼/▲/◄/► on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control, or touch the input source directly.
  4. Press EPG/BACK on the remote control, or touch a blank area outside of the menu to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

CDE Series

To select an input source:

  1. Press INPUT on the remote control.
  2. Press ▼/▲ on the remote control to select the PC source.
  3. Press OK/ENTER on the remote control.
  4. Press EPG/BACK on the remote control to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.

IFPG1 Series

To select an input source:

  1. Press INPUT on the front panel.
  2. In the OSD Menu, touch INPUT.
  3. Touch the PC input source directly.
  4. Touch a blank area outside of the menu to exit.
    5. NOTE: The above image is for reference only and is subject to change without notice.
Retrieved from "https://manuals.viewsonic.com/index.php?title=VPC-A31-O1_Using_the_Device&oldid=28130"