IFP62 Using the ViewBoard

Power On/Off your ViewBoard

1. Ensure the power cord is connected, plugged into a power outlet, and the power switch is in the “On” position.

2. Press the Power button to turn on the ViewBoard.
3. To turn the ViewBoard off, press and hold the Power button.

Initial Launch Setup

When you first turn on your ViewBoard, an initial setup wizard will launch.

• 
  Language Select
• 
  Network Connection
• 
  Date and Time
• 
  System Mode
• 
  Privacy and Copyright Protection

1. Select your Language.
2. Setup and verify your LAN connection.
3. Select your Time Zone to set the Date and Time.
4. Select your preferred System Mode.
5. Accept or Decline the Privacy and Copyright Protection Terms.

Toolbar

Toolbar trigger icons are on the edge of the ViewBoard launcher providing access to your tools.

To launch a tool:

1. Tap a Toolbar trigger icon.
2. Tap on your desired tool icon.

Toolbar Icons

Icon	Description
	Access the Pen, Highlighter, Clear, and Save options
	1. Digital Pen Annotate the overlay of any input source with red, black, blue, or green ink. NOTE: The default digital pen setting supports up to 10-point writing.
	2. Digital Highlighter Mark and highlight with four colors: yellow, orange, blue, and green. NOTE: The default digital highlighter setting supports up to 10-point marking.
	3. Brush Clears all the digital ink on the screen.
	4. Pen Color Setting Set the pen color. Choose from 4 settings.
	5. Close Close the digital pen icon.
	Convert the currently displayed content into a still image; then you can zoom in or zoom out
	1. Zoom In Enlarge the captured image. NOTE: The screen resolution will be reduced after zooming in.
	2. Zoom Out Shrink the captured image.
	3. Back to Full Screen Reset the Zoom In/Zoom Out effects to the original full screen.
	4. Close Close the icon.
	View more applications within the ViewBoard tool bar
	1. Spotlight Highlight the focus content zone. Tap the Setting icon to adjust the spotlight size and alpha blending effect.
	2. Countdown Access the countdown timer with an optional alarm setting. Touch and swipe to adjust the numeric values, then click Start. At any time, the countdown timer can be paused, resumed, or reset. The timer will reduce in size and move to the lower-center of the screen automatically when the user touches another area. Touching the timer again will return it to its normal size and original location.
	3. Stopwatch Tapping Start will initiate the stopwatch. At any time, the stopwatch can be paused, resumed, split, or reset. The stopwatch will reduce in size and move to the lower-center of the screen automatically when the user touches another area. Touching the stopwatch again will return it to its normal size and original location.