UMB202 Initial Setup

Wall Mounting

1. Pre-drill three holes into the wall and install the three wall anchors.
2. Align the wall bracket with the three anchors and secure the wall bracket with the three bracket screws.
3. Secure the camera to the mounting plate.

Attach the mounting plate to the wall bracket to complete the installation.

Note: When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.

VB-WMK-002 Mounting

Package Contents

• 
  UMB202
• 
  VB-WMK-002

Note: Some parts are optional accessories included in other ViewSonic products. Please refer to our website for more information

Mounting the Camera onto VB-WMK-002

Note: When installing the camera, please note that there is a dimensional tolerance of 3%. It’s advisable to manually measure the size and the distance between the users and the camera prior to final installation.

1. Line up the mounting plate with the VB-WMK-002.
2. Attach the mounting plate to the VB-WMK-002 with the screws.
3. Secure the camera to the mounting plate.

Note: For more information, refer to the VB-WMK-002 user guide.

Mounting UMB202 and VB-WMK-002 onto an IFP

After installing the UMB202 onto the VB-WMK-002, it can be set on an IFP as shown in the image below.

• 
  On the Top
• 
  On the Bottom

Note: Please refer to the Compatibility List on page 18 or contact our local service provider for more information.