UMB202 Making Connections

Connecting to Power

Power Adapter (DC IN)

1. Connect the power cord to the DC IN jack at the rear of the camera.
2. Plug the power cord plug into a power outlet.

Note: The power adapter includes four different plug faces.

Ethernet (Power over Ethernet)

1. Connect the Ethernet cable to the RJ45 port at the rear of the camera.
2. Plug the other end of the Ethernet cable into an Ethernet injector or similar equipment.

Connecting to External Devices

Note: Ensure the camera (UMB202) is the default video and audio output device when being used.

USB Connection

Connect one end of the USB cable to the camera’s USB port. Then, plug the other end into a USB port on your PC, Interactive Flat Panel (IFP), or Conference PC (MPC310-W31-TU).

Note:

• The RJ45 port only supports Power over Ethernet.
• Refer to the ViewSonic MPC310-W31-TU Conference PC and MRC1010-TN Touch Console user manual for detailed settings of ViewSonic MTR (Microsoft Teams Rooms).