• Print Print

TD2423d Initial Setup: Difference between revisions

From ViewSonic Documentation
Jump to: navigation, search
Created page with "<noinclude> {{Sticky_Menu_Monitor_2.1 |1=TD2423d_Introduction |2=TD2423d_Initial_Setup |3=TD2423d_Connecting_Power_and_Devices |4=TD2423d_Adjusting_the_Viewing_Angle |5=TD2423..."
 
No edit summary
 
Line 50: Line 50:
:<div class="res-img">[[File:TD2223_Wall_Mount.png|450px]]</div>
:<div class="res-img">[[File:TD2223_Wall_Mount.png|450px]]</div>
<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude>
<noinclude>=[[Monitor_Security_Slot| Using the Security Slot]]=</noinclude>
{{#seo:
|title=ViewSonic Monitor
|title_mode=append
|keywords=TD2423d, stand installation, wall mounting, VESA
|description=How to install and uninstall the stand on the TD2423D monitor.
}}


[[Category:TD2423d]]
[[Category:TD2423d]]

Latest revision as of 07:53, 28 April 2022

TD2423d Initial Setup
Introduction
Initial Setup
Connecting Power and Devices
Adjusting the Viewing Angle
Quick Menu
Hot Keys
On-Screen Display Menu Operation
On-Screen Display Menu Tree
Specifications
Regulatory and Service Information
Safety Precautions
Glossary
Troubleshooting
Maintenance

Stand Installation

  1. Place the monitor on a flat, stable surface with the screen facing down.
  2. With one hand applying downward pressure on the monitor, carefully lift and extend the stand.
  3. Lift the device into its upright position on a flat, stable surface.
  • Extend the stand
    Extend the stand
  • Lift into an upright position
    Lift into an upright position
Always place the device on a flat, stable surface. Failure to do so may cause the device to fall and damage the device and/or result in personal injury.

Wall Mounting

Refer to the table below for the standard dimensions for wall mount kits.

For use only with a UL certified wall mount kit/bracket. To obtain a wall-mounting kit or height adjustment base, contact ViewSonic® or your local dealer.
Maximum Loading Hole Pattern (W x H) Interface Pad (W x H x D) Pad Hole Screw Specification & Quantity
14 kg 100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm M4 x 10 mm - 4 pieces
  1. Turn off the device and disconnect all cables.
  2. Place the device on a flat, stable surface with the screen facing down.
  3. Unscrew the attached stand and carefully remove it.
  4. Attach the mounting bracket to the VESA mounting holes at the rear of the monitor. Then secure it with four (4) screws (M4 x 10 mm).
  5. Follow the instructions that come with the wall mounting kit to mount the monitor onto the wall.

Using the Security Slot

Retrieved from "https://manuals.viewsonic.com/index.php?title=TD2423d_Initial_Setup&oldid=18053"